HCN 50K100IP - Scale Kern - Free user manual and instructions
Find the device manual for free HCN 50K100IP Kern in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Kern |
| Model | HCN 50K100IP |
| Product type | Industrial precision balance |
| Maximum capacity | 50 kg |
| Readability | 0.1 g (or 1 g depending on version) |
| Dimensions (W x D x H) | 400 x 350 x 120 mm |
| Net weight | Approximately 8 kg |
| Power supply | 230 V AC, 50 Hz |
| Display | Backlit LCD screen |
| Weighing pan | Stainless steel, dimensions 350 x 300 mm |
| Main functions | Weighing, tare, piece counting, unit conversion |
| Protection rating | IP65 (protected against dust and water jets) |
| Interface | RS-232, USB (optional) |
| Cleaning | Clean with a soft damp cloth, avoid solvents |
| Maintenance | Periodic calibration recommended (every 6 months) |
| Safety | Overload protection up to 120% of capacity |
| Spare parts | Replacement pan, power adapter, RS-232 cable |
| Repairability | Repairability score 8/10 (parts available, easy disassembly) |
| Warranty | 2 years |
| Manual available in | French, German, English |
Frequently Asked Questions - HCN 50K100IP Kern
How to set up the Kern HCN 50K100IP scale for the first time?
Place the scale on a stable, level surface. Connect the power adapter and turn it on using the on/off button. Allow to warm up for about 30 minutes before precision weighing.
How to perform a tare?
Place the empty container on the pan, then press the TARE key. The display returns to zero. Then add the sample; the net weight is displayed.
What to do if the scale shows 'Err' or does not stabilize?
Check that the surface is stable and free from vibrations. Ensure the load does not exceed the maximum capacity. If the error persists, turn off and on again after 10 seconds.
How to calibrate the scale?
Use a certified calibration weight (e.g. 50 kg). Press the CAL key and follow the on-screen instructions. Calibration must be performed in a temperate environment.
What is the accuracy of the scale?
The readability is 0.1 g, offering high precision for weighings up to 50 kg. Repeatability is ±0.1 g.
Can I use the scale in a humid environment?
Yes, the IP65 protection rating allows use in humid or dusty areas. However, avoid prolonged direct water spray.
How to clean the scale?
Disconnect the device. Clean the pan and housing with a soft, slightly damp cloth. Do not use abrasive products or solvents. Dry with a clean cloth.
What accessories are available?
A range of accessories is available: replacement stainless steel pan, power adapter, RS-232 cable, calibration kit, and wall mount.
How to connect the scale to a PC?
Use the RS-232 port on the back. Connect a serial cable (DB9) to your computer. Configure the weighing software with the settings: 9600 baud, 8 data bits, no parity.
What to do if the scale does not turn on?
Check that the power adapter is properly connected and the outlet is working. If the scale remains off, the internal fuse may be defective. Contact customer service.
User questions about HCN 50K100IP Kern
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual HCN 50K100IP - Kern and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HCN 50K100IP by Kern.
USER MANUAL HCN 50K100IP Kern
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kern
Model : HCN 50K100IP
Category : Scale