GP 5000 - Water pump EINHELL - Free user manual and instructions
Find the device manual for free GP 5000 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Submersible water pump |
| Brand | Einhell |
| Model | GP 5000 |
| Power | 550 W |
| Voltage | 230 V / 50 Hz |
| Maximum flow rate | 5000 L/h |
| Max. delivery head | 30 m |
| Max. immersion depth | 5 m |
| Connection | 1″ (25 mm) |
| Protection class | IPX8 |
| Cable length | 10 m |
| Material | Stainless steel / plastic |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 20 x 20 x 40 cm |
| Max. water temperature | 35 °C |
| Dry running protection | Yes (float switch) |
| Main functions | Watering, pool drainage, rainwater evacuation |
| Maintenance | Clean the filter regularly |
| Spare parts available | Seals, impeller, capacitor |
Frequently Asked Questions - GP 5000 EINHELL
How to prime the GP 5000 pump?
The GP 5000 pump is self-priming up to a height of 2 m. For first start-up, fill the pump body with clean water via the filling opening, then plug it in.
Can the pump run dry?
No, the pump is equipped with a float switch that automatically cuts off the power if the water level is too low. Avoid dry running to prevent motor damage.
What is the maximum immersion depth?
The maximum immersion depth is 5 meters. Beyond that, the sealing gasket may be damaged.
How to clean the filter?
Unplug the pump, remove the suction cover and clean the filter with clean water and a soft brush. Reassemble before reuse.
What to do if the pump does not start?
Check the power supply, that the float is not stuck in the up position, and that the pump is properly primed. If the problem persists, contact customer service.
Can the pump be used for dirty water?
No, the GP 5000 is designed for clean water (rainwater, tap water). Impurities may clog the impeller and damage the pump.
How to store the pump in winter?
Completely drain the pump and hoses to prevent freezing. Clean it and store in a dry, frost-free place.
What is the noise level?
The noise level is approximately 70 dB(A), which is normal for this type of pump.
Does the pump have a non-return valve?
Yes, the GP 5000 pump includes a non-return valve built into the outlet to prevent water from flowing back.
Where to find spare parts?
Spare parts (seals, impeller, capacitor) are available from Einhell after-sales service or on their website. Use the model number GP 5000 to identify them.
User questions about GP 5000 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual GP 5000 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GP 5000 by EINHELL.
USER MANUAL GP 5000 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : GP 5000
Category : Water pump