GP Jet 1300 Niro - Water pump EINHELL - Free user manual and instructions
Find the device manual for free GP Jet 1300 Niro EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Surface water pump |
| Brand | Einhell |
| Model | GP Jet 1300 Niro |
| Nominal power | 1300 W |
| Maximum flow rate | 4500 L/h |
| Maximum manometric head | 45 m |
| Maximum suction depth | 8 m |
| Maximum pressure | 4.5 bar |
| Suction/discharge connection | 1\" (25 mm) |
| Body material | Stainless steel (Niro) |
| Power supply | 230 V / 50 Hz |
| Thermal protection | Yes |
| Protection class | IPX4 |
| Noise level | 70 dB(A) |
| Net weight | 13 kg |
| Dimensions (L x W x H) | 400 x 200 x 300 mm |
| Cable length | 1.5 m |
| Recommended use | Garden watering, domestic water supply |
| Delivery contents | Pump, user manual, connection accessories |
| Warranty | 2 years |
Frequently Asked Questions - GP Jet 1300 Niro EINHELL
How to prime the GP Jet 1300 Niro pump?
Before first use, fill the pump body with water through the filling port. Ensure the suction hose is submerged and there is no air leak. Turn on the pump and wait until it delivers water steadily.
What is the maximum suction depth?
The maximum suction depth is 8 meters. Beyond that, the pump may not work properly. Ensure the height between the pump and the water level does not exceed this value.
Can I use the pump for rainwater or dirty water?
This pump is designed for clear and clean water (e.g., filtered rainwater, tap water). Do not use it for water containing sand or particles, as this could damage the impeller.
What to do if the pump does not start?
First check the power supply (plug, fuse). Make sure the cable is not damaged. If the pump has thermal protection, wait for it to cool down. If the problem persists, contact customer service.
How to bleed air from the pump?
Open the filling cap and let water flow out. Close the cap as soon as water flows steadily. You can also loosen the discharge connection to release air, then retighten it.
What maximum pressure can this pump reach?
The maximum pressure is 4.5 bar. This corresponds to a manometric head of 45 meters. Do not exceed this pressure to avoid damaging pipes or connected devices.
How to maintain the GP Jet 1300 Niro pump?
After each use, drain remaining water through the drain plug. Clean the suction filter regularly. In winter, store the pump frost-free. Check seals and connections.
Is the pump protected against dry running?
Yes, the pump has automatic dry-run protection. If it detects a lack of water, it stops to prevent overheating. Wait for water to return before restarting.
What spare parts are available?
Common spare parts are seals, gland packing, impeller, capacitor, and cable. You can order them from Einhell customer service or specialized stores.
Where to find the complete user manual?
The user manual is available for free download on the site notice-facile.com. You can also request it by email via the translation form on the page.
User questions about GP Jet 1300 Niro EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual GP Jet 1300 Niro - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GP Jet 1300 Niro by EINHELL.
USER MANUAL GP Jet 1300 Niro EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : GP Jet 1300 Niro
Category : Water pump