EINHELL

GC-GP 6050 ECO PLUS - Water pump EINHELL - Free user manual and instructions

Find the device manual for free GC-GP 6050 ECO PLUS EINHELL in PDF.

📄 150 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice EINHELL GC-GP 6050 ECO PLUS - page 12
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeGarden surface pump
BrandEinhell
ModelGC-GP 6050 ECO PLUS
CategoryWater pump
Power consumption1100 W
Supply voltage230 V ~ 50 Hz
Max flow rate6000 L/h
Max delivery head50 m
Max pressure5 bar
Pump bodyCast iron
ImpellerTechnopolymer
Connection1" (25.4 mm) threaded connection
Power cableApprox. 1.5 m, H05RN-F
Thermal protectionYes, automatic shutdown in case of overheating
Weight13.5 kg
Dimensions (L x W x H)47 x 28 x 32 cm
Max water temperature35 °C
Self-priming functionYes, up to 8 m suction height
Sound level72 dB(A)
Protection classIPX4
Warranty2 years

Frequently Asked Questions - GC-GP 6050 ECO PLUS EINHELL

How to install the Einhell GC-GP 6050 ECO PLUS water pump?
Place the pump on a flat and stable surface, near a power outlet with a residual current device. Connect the suction hose with a check valve and the discharge hose. Fill the pump with water before the first start.
Can the pump be used for drinking water?
No, this pump is designed for clear non-potable water, such as rainwater or well water. For drinking water, use a suitable model.
What to do if the pump does not start?
Check the power supply, the power cable and that the circuit breaker has not tripped. Make sure the pump is primed (filled with water). If the problem persists, contact customer service.
How to maintain the pump after use?
Drain the water from the pump and hoses to prevent freezing. Clean the suction strainer and check the condition of the seals. Store it in a dry, frost-free place.
What is the maximum suction height?
The maximum suction height is 8 meters in self-priming mode. For higher heights, a submersible pump is needed.
Can I pump water containing sand?
No, this pump is designed for clear water. Sand or impurities can damage the impeller and reduce the pump's lifespan.
How to protect the pump from frost?
Before winter, completely drain the pump and hoses. Remove the drain plugs if present. Store the pump in a frost-free room at a temperature above 5 °C.
Can the pump operate without water?
No, the pump must never run dry. This damages the seals and can cause motor overheating. Use a dry-run protection device.
Where to find spare parts for this model?
Spare parts are available from Einhell customer service or on their website. Refer to the parts list in the manual to order.
What is the maximum pressure of the pump?
The maximum pressure is approximately 5 bar (50 meters delivery head). This is suitable for irrigation and tank filling.

User questions about GC-GP 6050 ECO PLUS EINHELL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Water pump in PDF format for free! Find your manual GC-GP 6050 ECO PLUS - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GC-GP 6050 ECO PLUS by EINHELL.

USER MANUAL GC-GP 6050 ECO PLUS EINHELL

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : EINHELL

Model : GC-GP 6050 ECO PLUS

Category : Water pump