BEHPG 090 - Air Conditioning BEKO - Free user manual and instructions
Find the device manual for free BEHPG 090 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Beko |
| Model | BEHPG 090 |
| Product Type | Portable Air Conditioner |
| Cooling Capacity | 9000 BTU/h (2.6 kW) |
| Energy Efficiency Ratio (EER) | 2.6 (W/W) |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power Input (Cooling) | 1050 W |
| Rated Current | 4.8 A |
| Airflow Rate (Max) | 420 m³/h |
| Dehumidification Capacity | 1.2 L/h |
| Noise Level (Low/High) | 52 / 56 dB(A) |
| Refrigerant Type | R290 (Propane) |
| Refrigerant Charge | 180 g |
| Dimensions (W x D x H) | 700 x 430 x 350 mm |
| Weight (Net) | 25 kg |
| Control Type | Remote Control + Touch Panel |
| Modes | Cool, Fan, Dehumidify, Auto, Sleep |
| Timer | 24-hour programmable |
| Air Filter | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Overheat protection, auto restart, child lock |
| Spare Parts Available | Remote control, filter, exhaust hose |
| Repair Index (France) | 8.0 / 10 |
| Installation | Requires window kit (included) |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - BEHPG 090 BEKO
How do I install the BEHPG 090 portable air conditioner?
Install the exhaust hose and window kit as shown in the manual. Ensure the hose is not kinked and the window is sealed for optimal performance. The unit must be placed on a level surface near a power outlet.
How often should I clean the air filter?
Clean the washable mesh filter every two weeks. Remove the filter, wash with lukewarm water, dry completely, and reinsert. A dirty filter reduces efficiency.
What does error code E1 mean?
Error E1 indicates a room temperature sensor failure. Turn off the unit, wait 10 minutes, and restart. If the error persists, contact Beko service.
Can I use the air conditioner without the exhaust hose?
No. The exhaust hose must be vented to the outside to remove hot air. Using the unit without it will cause overheating and damage.
What is the recommended room size for this model?
The BEHPG 090 is suitable for rooms up to 25 m² (270 sq ft) for effective cooling. For larger rooms, consider a higher BTU model.
How do I use the sleep mode?
Press the Sleep button on the remote or panel. The unit will gradually increase the temperature by 1°C per hour for the first 2 hours, then maintain for comfort and energy savings.
Why is the unit blowing warm air?
Check if the exhaust hose is properly connected and not blocked. Also ensure the air temperature setpoint is lower than the room temperature. If the compressor hasn't started, wait 3 minutes.
Can I use an extension cord?
Beko recommends plugging the unit directly into a grounded wall socket. If an extension cord is necessary, use a heavy-duty one rated at least 15A with a ground, but avoid if possible.
How do I drain the water from the unit?
In humid conditions, water may accumulate. Use the continuous drain hose (not included) by attaching it to the bottom drain outlet. Alternatively, manually drain when the tank is full (indicated by alarm).
Where can I find spare parts like the remote?
Spare parts are available from Beko authorized service centers or online retailers. Use model number BEHPG 090 to find compatible parts.
User questions about BEHPG 090 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual BEHPG 090 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BEHPG 090 by BEKO.
USER MANUAL BEHPG 090 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BEHPG 090
Category : Air Conditioning