BRHPC 180 - Air Conditioning BEKO - Free user manual and instructions
Find the device manual for free BRHPC 180 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Beko |
| Model | BRHPC 180 |
| Cooling Capacity (BTU/h) | 9000 |
| Heating Function | Yes (Heat Pump) |
| Power Consumption (Cooling, W) | 1000 |
| Air Flow (m³/h) | 300 |
| Noise Level (dB) | 65 |
| Dimensions (W x D x H, mm) | 450 x 350 x 700 |
| Weight (kg) | 25 |
| Refrigerant | R290 |
| Energy Class | A+ |
| Controls | Remote Control + Digital Display |
| Timer (h) | 24 |
| Dehumidification (L/day) | 1.2 |
| Auto Swing | Yes |
| Installation Kit Included | Yes (Window Kit) |
| Filter Type | Washable Mesh Filter |
| Safety Features | Auto Shut-off, Overload Protection |
| Spare Parts Available | Filter, Remote Control |
Frequently Asked Questions - BRHPC 180 BEKO
How do I clean the air filter?
Turn off and unplug the unit. Remove the filter grille, take out the filter, and wash it with warm soapy water. Rinse and dry thoroughly before reinstalling. Clean every two weeks for optimal performance.
What does error code E1 mean?
Error E1 indicates a temperature sensor malfunction. Try unplugging the unit for 5 minutes and restarting. If the error persists, contact Beko customer service.
How to install the window kit?
Open your window horizontally. Insert the window slider panel into the track. Extend it to fit the window width. Use foam seals to fill gaps. Attach the exhaust hose from the unit to the window kit. Ensure a secure seal to prevent hot air entering.
Can I use the air conditioner in a room without windows?
No, the unit requires ventilation through a window or door to exhaust hot air. Without proper ventilation, the unit cannot cool effectively and may cause overheating.
How to set the timer?
Press the TIMER button on the remote or control panel. Use +/- to set the desired hours for automatic on/off. Confirm by pressing TIMER again. The display will show the timer setting.
Why is water leaking from the unit?
Leakage can occur if the drain pan is full or the unit is not level. Empty the pan by removing the drain plug. Also check that the unit is on a flat surface. In high humidity, continuous drainage may be needed.
How to switch to heating mode?
Press the MODE button repeatedly until the HEAT indicator appears on the display. Set your desired temperature using +/-. Note: Heating mode works in lower ambient temperatures, typically above 7°C.
What size room can this unit cool?
The BRHPC 180 is suitable for rooms up to 25-30 m² (approximately 270-320 sq ft) depending on insulation and ceiling height.
How to store the air conditioner in winter?
Clean the filter and unit thoroughly. Remove the exhaust hose and window kit. Drain all water from the internal tank. Store the unit in a dry, cool place away from direct sunlight. Cover it to prevent dust.
The remote control is not working. What should I do?
First, check if the batteries need replacement. Ensure there are no obstructions between the remote and the unit. If still not working, use the control panel on the unit temporarily. Try resetting the remote by removing batteries and pressing all buttons.
User questions about BRHPC 180 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual BRHPC 180 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRHPC 180 by BEKO.
USER MANUAL BRHPC 180 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : BRHPC 180
Category : Air Conditioning