STEINBERG

SBS-MD-12 - Detector STEINBERG - Free user manual and instructions

Find the device manual for free SBS-MD-12 STEINBERG in PDF.

📄 43 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice STEINBERG SBS-MD-12 - page 9
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Metal Detector
Brand Steinberg
Model SBS-MD-12
Dimensions 120 x 25 x 10 cm
Weight 1.2 kg
Power Supply 2 x 9V batteries (not included)
Operating Frequency 7.5 kHz
Maximum Detection Depth Up to 30 cm (coins), 80 cm (large objects)
Detection Modes All Metal, Discrimination, Pinpoint
Sensitivity Adjustment Yes, adjustable over 10 levels
Display Backlit LCD with target indicator
Low Battery Indicator Yes, icon on screen
Audio Built-in speaker and 3.5 mm headphone jack
Warranty 2 years
Maintenance and Cleaning Clean with a soft, dry cloth. Avoid water and solvents.
Safety Use outdoors in dry weather. Do not use in rain or near water.
Spare Parts and Repairability Replacement coil, replacement shaft, battery holder available.

Frequently Asked Questions - SBS-MD-12 STEINBERG

How to turn on the detector?
Press the Power button on the control panel. A beep confirms power-on.
How to adjust sensitivity?
Use the SENS knob to increase or decrease sensitivity. Too high a setting may cause false signals.
Why does the device beep continuously?
This may be due to electromagnetic interference, highly mineralized soil, or too high sensitivity. Reduce sensitivity or move away from noise sources.
How to change the batteries?
Open the battery compartment on the back of the device. Insert two 9V batteries following the indicated polarity.
What is the maximum detection depth?
The depth depends on the size and type of object: up to 30 cm for a coin and up to 80 cm for a large object like an iron box.
Can I use headphones with the detector?
Yes, plug a standard headphone with 3.5 mm jack into the headphone output for discreet listening.
How to clean the detector?
Use a soft, dry cloth to wipe the housing and shaft. Never use water or chemicals.
Is the device waterproof?
No, the detector is not waterproof. Do not use it in the rain or immerse it. The coil is resistant to light moisture but not to water.
What to do if the display does not work?
First check the batteries. If they are good, try resetting the device by removing the batteries for one minute. If the problem persists, contact customer service.
Where to find spare parts?
Parts like the coil, shaft, or battery holder are available from Steinberg dealers or by online order.

User questions about SBS-MD-12 STEINBERG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Detector in PDF format for free! Find your manual SBS-MD-12 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-MD-12 by STEINBERG.

USER MANUAL SBS-MD-12 STEINBERG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : STEINBERG

Model : SBS-MD-12

Category : Detector