Oceanair Skysol Precision - Roller blind DOMETIC - Free user manual and instructions
Find the device manual for free Oceanair Skysol Precision DOMETIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Dometic |
| Model | Oceanair Skysol Precision |
| Product type | Motorized roller blind |
| Usage | Indoor and outdoor |
| Standard dimensions | Width: 60 to 180 cm, height: 60 to 200 cm |
| Approx. weight | 3 to 6 kg depending on size |
| Power supply | 12 V DC (battery or solar) |
| Motor | Silent tubular motor |
| Controls | RF remote control, wall switch or mobile app (optional) |
| Functions | Up, down, stop, memory position, timer programming |
| Fabric material | Coated polyester, UV resistant |
| Roller tube | Anodized aluminum |
| Installation | Wall or ceiling mounting, kit provided |
| Maintenance | Clean with warm water and mild soap, avoid solvents |
| Safety | Obstacle detection, automatic stop, child safe |
| Sun protection | Sun protection factor UPF 50+ |
| Operating temperature | -10 °C to +50 °C |
| Warranty | 2 years |
| Spare parts | Available via Dometic after-sales service |
| Repairability | Repairability index: 8/10 |
Frequently Asked Questions - Oceanair Skysol Precision DOMETIC
How to install the Oceanair Skysol Precision blind?
Installation requires fixing the wall or ceiling bracket using the supplied plugs. Ensure the surface is flat and solid. The motor must be powered by 12V DC. Follow the assembly diagram in the manual.
How to clean the fabric of the blind?
Use a soft cloth dampened with warm water and mild soap. Do not use abrasive products or solvents. Rinse with clean water and allow to air dry.
The remote control does not work, what to do?
Check the batteries of the remote control. If the problem persists, reset the remote control by pressing the reset button on the motor (see manual). Make sure no obstacle is blocking the signal.
Can I program opening/closing times?
Yes, the blind has a timer programming function. Use the remote control or mobile app to set the up and down times. Consult the programming guide.
The blind stops while moving, why?
This may be due to obstacle detection. Check that no object is obstructing the movement. If the problem recurs, reset the limit switches by following the procedure in the manual.
What type of power supply is needed?
The blind operates on 12V DC. It can be connected to a battery, solar panel, or mains transformer. The power cable is included.
How to pair a new remote control?
Turn on the blind, press the programming button on the motor (located on the side) for 3 seconds until the blind moves. Then press the desired button on the remote control to pair it.
Is the blind suitable for outdoor use?
Yes, the fabric is UV treated and weather resistant. However, in case of strong winds, it is recommended to retract the blind to avoid damage.
How to replace the batteries in the remote control?
Open the compartment on the back of the remote control with a screwdriver. Replace the batteries with CR2032 alkaline batteries. Close carefully.
Where to find spare parts?
Spare parts (fabric, tube, motor, remote control) are available from Dometic after-sales service. Contact your dealer or the official website with your model number.
User questions about Oceanair Skysol Precision DOMETIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Roller blind in PDF format for free! Find your manual Oceanair Skysol Precision - DOMETIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Oceanair Skysol Precision by DOMETIC.
USER MANUAL Oceanair Skysol Precision DOMETIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DOMETIC
Model : Oceanair Skysol Precision
Category : Roller blind