Ulisse Radical Thermal - Uncategorized Videotec - Free user manual and instructions
Find the device manual for free Ulisse Radical Thermal Videotec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal surveillance camera |
| Brand | Videotec |
| Model | Ulisse Radical Thermal |
| Dimensions | Approximately 200 x 120 x 100 mm |
| Weight | Approximately 1.2 kg |
| Power Supply | 12 V DC / PoE (Power over Ethernet) |
| Power Consumption | 10 W (max) |
| Thermal Sensor | Resolution 640 x 480 pixels |
| Temperature Range | -20 °C to +50 °C |
| Video Resolution | H.265, 30 fps |
| Field of View | 45° (horizontal) |
| Protection Rating | IP66 |
| Housing Material | Aluminum and stainless steel |
| Connectivity | Ethernet RJ45, alarm input/output |
| Main Functions | Intrusion detection, thermal imaging, HD video, video analytics |
| Maintenance and Cleaning | Clean the lens with a soft, dry cloth; check the seals |
| Safety | CE compliant, surge protection |
| Spare Parts and Repairability | Available on request from the manufacturer |
| Operating Temperature | -40 °C to +65 °C |
| Warranty | 2 years |
Frequently Asked Questions - Ulisse Radical Thermal Videotec
How to install the Ulisse Radical Thermal camera?
Attach the provided wall mount, connect the 12 V DC or PoE power supply, then plug in the Ethernet cable. Use the provided software to configure the IP address and detection settings.
What is the maximum detection range?
The detection range depends on conditions, but it can reach up to 500 meters for a human-sized object. Refer to the manual for specific distances based on the lens.
How to clean the thermal lens?
Use a soft, dry microfiber cloth. Avoid chemicals. If necessary, slightly dampen with distilled water. Do not rub vigorously to avoid scratching the lens.
Can I use the camera outdoors in rainy weather?
Yes, the IP66 rating ensures protection against water jets and dust. Make sure the cables are properly sealed.
How to reset the camera to factory settings?
Press and hold the reset button on the back of the camera for 10 seconds. The LEDs will blink to confirm the reset.
What is the resolution of the thermal image?
The sensor offers a resolution of 640 x 480 pixels for the thermal image, with a sensitivity of 50 mK. The visible video can reach 1920 x 1080 pixels.
Does the camera support audio?
No, the Ulisse Radical Thermal model does not have a built-in audio input. For audio, you must use a compatible external device.
How to update the firmware?
Download the latest firmware from Videotec's website, log into the camera's web interface, then go to Maintenance > Firmware Update and select the file.
What cables are needed for installation?
An Ethernet cable Cat5e or higher for network connection and PoE power, or a 12 V DC power cable if PoE is not used. A strain relief cable is also recommended.
Where can I find spare parts?
Spare parts are available from Videotec's after-sales service. Contact your authorized dealer or visit the official website to order.
User questions about Ulisse Radical Thermal Videotec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Ulisse Radical Thermal - Videotec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ulisse Radical Thermal by Videotec.
USER MANUAL Ulisse Radical Thermal Videotec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Videotec
Model : Ulisse Radical Thermal
Category : Uncategorized