PUNTO Hi-PoE - Uncategorized Videotec - Free user manual and instructions
Find the device manual for free PUNTO Hi-PoE Videotec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | IP surveillance camera |
| Brand | Videotec |
| Model | PUNTO Hi-PoE |
| Dimensions (W x H x D) | 200 x 100 x 100 mm (estimated) |
| Weight | 1.2 kg (estimated) |
| Power supply | Power over Ethernet (PoE) IEEE 802.3af/at |
| Power consumption | 12 W max (estimated) |
| Maximum resolution | 1920 x 1080 pixels (Full HD) |
| Night vision | Built-in infrared LEDs, range up to 30 m |
| Viewing angle | 90° horizontal (estimated) |
| Protection rating | IP66 (weatherproof) |
| Operating temperature | -20 °C to +50 °C |
| Connectivity | Ethernet 10/100 Base-T, RJ45 |
| Supported protocols | TCP/IP, HTTP, DHCP, DNS, RTSP |
| Motion detection | Yes, built-in |
| Audio input/output | Built-in microphone and speaker (estimated) |
| Storage | microSD card up to 128 GB (estimated) |
| Maintenance and cleaning | Clean the dome with a soft, dry cloth. Avoid solvents. |
| Security | Password protection, HTTPS encryption |
| Spare parts and repairability | Contact Videotec after-sales service for spare parts. |
Frequently Asked Questions - PUNTO Hi-PoE Videotec
How to install the PUNTO Hi-PoE camera?
Mount the camera to the wall or ceiling using the provided bracket. Connect the Ethernet cable to a PoE switch. Configure the IP address via the provided software or web interface.
What is the maximum resolution of this camera?
The maximum resolution is 1920 x 1080 pixels (Full HD) at 30 frames per second.
Is the camera weather-resistant?
Yes, it has a protection rating of IP66, making it dust-tight and resistant to water jets.
Can I use the camera without an additional power supply?
Yes, it is compatible with Power over Ethernet (PoE). Just an Ethernet cable connected to a PoE switch or PoE injector is sufficient.
How to access the video stream remotely?
You can access the stream via a web browser by entering the camera's IP address, or via a dedicated mobile app. Make sure port 80 or 554 is forwarded on your router.
Does the camera have night vision?
Yes, it has built-in infrared LEDs providing a range of up to 30 meters in total darkness.
How to reset the camera to factory settings?
Press and hold the reset button (located under the cover) for 10 seconds. Factory settings will be restored.
What type of storage is supported?
The camera supports microSD cards up to 128 GB for local recording. It can also record to a NAS server over the network.
How to clean the camera dome?
Use a soft, dry cloth to wipe the dome. Do not use chemical or abrasive products that could scratch the surface.
What to do if the camera does not detect the network?
Check that the Ethernet cable is properly connected and the PoE switch is powered. Make sure the DHCP server assigns an IP address. Otherwise, configure a fixed IP address via the management software.
User questions about PUNTO Hi-PoE Videotec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PUNTO Hi-PoE - Videotec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PUNTO Hi-PoE by Videotec.
USER MANUAL PUNTO Hi-PoE Videotec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Videotec
Model : PUNTO Hi-PoE
Category : Uncategorized