CA 751 - Uncategorized CHAUVIN ARNOUX - Free user manual and instructions
Find the device manual for free CA 751 CHAUVIN ARNOUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital multimeter |
| Brand | Chauvin Arnoux |
| Model | CA 751 |
| Dimensions (L x W x H) | 180 x 85 x 55 mm |
| Weight | 350 g (with batteries) |
| Power supply | 2 LR6 (AA) 1.5 V batteries |
| Display | LCD, 6000 counts |
| Main functions | AC/DC voltage measurement, AC/DC current, resistance, capacitance, frequency, diode test, continuity test |
| AC voltage measurement ranges | 0 to 600 V |
| DC voltage measurement ranges | 0 to 600 V |
| AC current measurement ranges | 0 to 10 A |
| DC current measurement ranges | 0 to 10 A |
| Resistance measurement ranges | 0 to 40 MΩ |
| Capacitance measurement ranges | 0 to 40 mF |
| Basic accuracy | ±0.5% (DC voltage) |
| Safety category | CAT III 600 V |
| Maintenance and cleaning | Clean with a soft, dry cloth. Do not use solvents. |
| Safety | Follow safety instructions for electrical measurements. Do not exceed maximum voltages. |
| Spare parts and repairability | Batteries and fuses replaceable. For other repairs, contact after-sales service. |
| General information | Supplied with test leads, batteries and user manual. |
Frequently Asked Questions - CA 751 CHAUVIN ARNOUX
How to measure voltage with the CA 751?
Connect the test leads to the COM and V terminals. Turn the selector to the V~ position for AC or V– for DC. Place the probes on the circuit and read the value on the display.
How to test continuity of a wire?
Turn the selector to the continuity test position (diode or sound wave symbol). Place the probes on each side of the wire. If continuity is good, the device emits a beep.
What does the V~ symbol on the selector mean?
The V~ symbol corresponds to AC voltage measurement. Use this position to measure mains or alternating voltages.
How to change the batteries of the CA 751?
Turn off the device and remove the back cover. Replace the two used LR6 (AA) batteries with new ones, respecting polarity. Close the cover.
What is the safety category of the CA 751?
The CA 751 is category CAT III 600 V. This means it can be used on power distribution circuits up to 600 V, such as wall outlets.
What to do if the device does not turn on?
Check that the batteries are correctly installed and not discharged. If the problem persists, check the internal fuse. If necessary, contact after-sales service.
How to measure current with the CA 751?
To measure current, connect the red lead to the 10A terminal for high currents or to the mA terminal for small currents. Turn the selector to the A~ (AC) or A– (DC) position. Insert the device in series in the circuit.
Can I measure voltages above 600 V?
No, never exceed the indicated maximum voltage (600 V AC/DC) to avoid damaging the device and creating a hazard. Use a device suitable for high voltages.
How to clean the multimeter?
Use a soft, dry cloth to wipe the case. Never use solvents, alcohol, or abrasive products that could damage the surface.
Where to find the complete user manual?
The user manual is available for free download on the Chauvin Arnoux website or on platforms like notice-facile.com. You can also request a translation by email.
User questions about CA 751 CHAUVIN ARNOUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CA 751 - CHAUVIN ARNOUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA 751 by CHAUVIN ARNOUX.
USER MANUAL CA 751 CHAUVIN ARNOUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CHAUVIN ARNOUX
Model : CA 751
Category : Uncategorized