DDC8271W - Cooker AEG - Free user manual and instructions

Product Type	Cooker
Brand	AEG
Model	DDC8271W
Dimensions (W x D x H)	60 x 60 x 85 cm
Net weight	55 kg
Power supply	230 V / 50 Hz
Cooker type	Freestanding
Number of cooking zones	4
Cooking zone type	Induction
Maximum power per zone	2.5 kW (1 zone), 3.7 kW (rapid zone)
Oven capacity	70 L
Oven functions	Conventional, Fan forced, Grill, Bottom heat, Defrost
Energy class	A+
Cleaning	Pyrolytic (self-cleaning)
Safety	Automatic shut-off, child lock, control lock
Repairability (score)	8.5 / 10
Spare parts available	Yes, via AEG after-sales service and authorized dealers
Included accessories	Grill rack, drip tray, rotisserie support (depending on model)
Warranty	2 years (extension possible)

Frequently Asked Questions - DDC8271W AEG

How to use the pyrolytic function?

The pyrolytic function enables self-cleaning of the oven by heating to a high temperature (approx. 500°C) to burn off residues. Remove all accessories and activate the cycle via the menu. Duration is about 2 hours.

How to set the time on the cooker?

Press the Clock button, then use the +/- buttons to set the time. Confirm with the OK button. Refer to the manual for specific models.

Why are the induction plates not heating?

Check that the pan is induction-compatible (magnetic bottom) and that the cooking zone is correctly selected. If the indicator is flashing, there may be a child lock activated.

How to clean the oven glass?

Use a soft cloth and a non-abrasive cleaner. For stubborn stains, activate the pyrolytic function. Never use chlorine-based products or steel wool.

What to do if an error code is displayed?

Note the code (e.g., F0, F5) and consult the Troubleshooting section of the manual. The most common codes indicate overheating, a probe problem, or an electronic failure.

How to replace the oven light bulb?

Cut off the power, unscrew the protective cover, then replace the bulb with a halogen bulb resistant to 300°C (type G9, 25W). Replace the cover before turning back on.

What type of pan to use on induction zones?

Only pans with a ferromagnetic base (magnet sticks) are suitable. Preferably use stainless steel, cast iron, or enameled pans.

How to disable the child lock?

Hold down the Lock button or safety button for 3 seconds until the lock icon disappears from the display.

What is the minimum depth for installation?

For a freestanding cooker, allow at least 5 cm of space at the back for ventilation. Exact dimensions are in the installation manual.

How to calibrate cooking?

Use the Boost function to heat quickly, then reduce the power. For the oven, always preheat for 10 minutes before baking. Consult the cooking table in the manual.

USER MANUAL DDC8271W AEG

DDC8271W

1. Press the handle of the mounting clip on the filter panel under the hood (1).

Welcome to AEG! Thank you for choosing our appliance.

Get usage advice, brochures, troubleshooting, service and repair information:

www.aeg.com/support

Subject to change without notice.

CONTENTS

1. SAFETY INFORMATION......76
2. SAFETY INSTRUCTIONS.... 79
3. INSTALLATION....80
4. PRODUCT DESCRIPTION....80
5. DAILY USE....81
6. CARE AND CLEANING....84
7. TROUBLESHOOTING....85
8. ENVIRONMENTAL CONCERNS....86

1. ⚠ SAFETY INFORMATION

Before installing and using the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage resulting from incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Safety for children and vulnerable people

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Children under 8 years of age and persons with very extensive and complex disabilities must be kept away from the appliance unless continuously supervised.

Children should be supervised to ensure that they do not play with the appliance.

Keep all packaging away from children and dispose of it appropriately.

• Keep children and pets away from the appliance when it is operating.
• Children shall not carry out cleaning or user maintenance of the appliance without supervision.

1.2 General Safety

• This appliance is intended for domestic use above hobs, cookers, and similar cooking devices.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses, and other similar accommodation where such use does not exceed (average) domestic usage levels.
• Before carrying out any maintenance, disconnect the appliance from the power supply.
• CAUTION: Accessible parts may become hot during use with cooking appliances.
• Use only the fixing screws supplied with the appliance. If not supplied, use the screws recommended in the installation instructions. Install the appliance in a safe and suitable place that meets installation requirements.
• WARNING: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
• Do not use adhesives to fix the appliance.
• The minimum distance between the hob surface on which the pans stand and the lower part of the appliance shall be at least 65 cm, unless otherwise specified in the installation instructions for the appliance or hob.
• The discharge of air must comply with local authorities regulations.
• Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of gases into the room from appliances burning gas or other fuels, including open fires.

- Make sure that the ventilation openings are not blocked and the air collected by the appliance is not conveyed into a duct used to exhaust smoke and steam from other appliances (central heating systems, thermosiphons, water-heaters, etc.).

- When the appliance operates with other appliances the maximum vacuum generated in the room should not exceed 0.04 mbar.

- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard.

- If the cord set is damaged, it must be replaced by a special cord set available from the manufacturer or its Authorised Service Centre.

- If the appliance is connected directly to the power supply, the electrical installation must be equipped with an isolating device that allows to disconnect the appliance from the mains at all poles. Complete disconnection must comply with conditions specified in the overvoltage category III. The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

- Do not flambé under the appliance.

- Do not use to exhaust hazardous or explosive materials and vapours.

- Clean the appliance regularly with a soft cloth to prevent the deterioration of the surface material.

- Do not use a steam cleaner, water spray, harsh abrasive cleaners or sharp metal scrapers to clean the surface of the appliance. Use only neutral detergents.

- Clean grease filters regularly (at least every 2 months) and remove grease deposits from the appliance to prevent the risk of fire.

- Use a cloth to clean the interior of the appliance.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Risk of injury, electric shock, fire, burns or damage to the appliance.

• Only a qualified person must install this appliance.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Before installing the appliance remove all the packaging, the labelling and the protective film.
• Do not install the exhaust air into a wall cavity, unless the cavity is designed for that purpose.

2.2 Electrical connection

WARNING!

Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• If the symbol ( ) is not printed on the rating plate, the appliance must be earthed. Always use a correctly installed shockproof socket.
• Do not let the electricity mains cable tangle.
• Do not use multi-plug adapters and extension cables.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable can make the terminal become too hot.
• Connect the appliance at the end of the installation. Make sure that there is access to the mains after the installation.

2.3 Use

WARNING!

Risk of injury, burns and electric shock.

• This appliance is for cooking purpose only. Do not use the appliance for other purpose.
• Do not change the specification of this appliance.
• Do not operate the appliance with wet hands or when it has contact with water.
• Use only the accessories supplied with the appliance.
• Keep flames or heated objects away from fats and oils during cooking and frying.
• Do not use uncovered electric grills.
• Do not use the appliance as a storage surface.
• Do not use magnifying glasses, binoculars or similar optical devices to look directly at the lighting of the appliance.
• If the appliance works with other devices, the maximum developed pressure must not exceed 4 Pa (4x10-5 bar).

2.4 Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only. - Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

2.5 Disposal

WARNING!

Risk of injury or suffocation.

- Contact your municipal authority for information on how to dispose of the appliance.

• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Installation instructions

For complete information about the installation of the appliance refer to a separate installation booklet.

4. PRODUCT DESCRIPTION

4.1 Control panel overview

Function Description

1 Filter reset Resets the active filter notification.

2 First speed / Off The motor switches to first speed level. Second press turns off the appliance.

3 WiFi indicator Indicates WiFi connection status.

4 Lamp Turns the lights on and off. Changes the light intensity.

5 Fan speed indicators Indicate fan speed levels.

6 Speed boost indicator Blinks when the motor switches to speed boost level.

7 Third speed indicator Lights up when the motor switches to third speed level.

	Function Description
8	Second speed indicator Lights up when the motor switches to second speed level.
9	Breeze / First speed indicator Blinks when the motor switches to Breeze level or lights up when the motor switches to first speed level.
10	Fan speed button Changes the fan speed level.
11	Filter indicator Reminds to change or clean the charcoal filter and clean the grease filter.

5. DAILY USE

5.1 Using the hood

Check the recommended speed according to the table below.

Breeze	Refreshes the air in kitchen after cooking at a very low noise level. The function turns off automatically after 60 minutes. Use after cooking only.
First speed While heating up food, cooking with covered pots.
Second speed	While cooking with covered pots on multiple cooking zones or burners, gentle frying.
Third speed	While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners.
Speed boost	While boiling and frying big quantities of food without a lid, big humidity. After 8 minutes the appliance returns to previous setting.

It is recommended to leave the hood operating for approximately 15 minutes before and after cooking.

Activating the appliance

To operate the hood:

Press the Ⓐ button to switch on the hood. The appliance starts to operate at first speed level.

Press the button to set the fan speed level in the following order: Breeze - First speed - Second speed - Third speed - Speed boost - Off.

Deactivating the appliance

To turn off the appliance, press the ⏻ button again or press and hold the ⚙ button for 3 seconds.

Perfect Illumination - Lighting

Activating and deactivating the lighting

To illuminate the cooking surface press the

button. Press the button again to change the light intensity in the following order: Maximum, Medium, Low, Off.

To switch off the lights, press and hold the button for 3 seconds.

Setting the light colour temperature

To set the light colour temperature, use the remote control supplied with the appliance.

i

Refer to the separate user manual supplied with the remote control.

AuroraTech®

It is a function that automatically adjusts the illumination colour and intensity based on the time of day, creating an optimal ambiance. Use the app to activate this function.

i

After activating from the app, the function will operate each time the lighting is switched on. You can still manually adjust the lighting settings using the button. However, the AuroraTech® function will be deactivated.

5.2 Hob2Hood®

It is a function that connects the hob to a hood. Both the hob and the hood are equipped with an infrared signal communicator. The fan speed is determined based on the mode setting and the temperature of the hottest cookware on the hob. Alternatively, you can manually control the fan using the hob. This function can be activated from the hob's control panel.

i

For more information how to use the function, refer to the hob user manual.

5.3 Filter notification

The filter alarm serves as a reminder to clean the grease filter and either replace or clean the charcoal filter, depending on its type. The filter alarm indicator blinks regularly for 30 seconds if the grease filter must be cleaned. The filter alarm indicator blinks twice per every second for 30 seconds if the charcoal filter must be replaced or cleaned.

i

This function activates independently after 40 hours of operation for the grease filter and 160 hours of operation for the charcoal filter.

Refer to "Cleaning the grease filter" in the "Care and cleaning" chapter.

Refer to "Cleaning the charcoal filter" or "Replacing the charcoal filter" in the "Care and cleaning" chapter.

To reset the function counter:

Press the 📄 button for 3 seconds.

The filter alarm indicator blinks red three times and then stops blinking to confirm the reset.

To activate or deactivate the counter for the charcoal filter:

1. Make sure the fan and the light are turned off.
2. Press and hold the and buttons for 3 seconds. The function is activated if the filter alarm indicator blinks red once. The function is deactivated if the filter alarm indicator blinks red twice.

5.4 Deactivating and activating panel sounds

To deactivate or activate the sounds of the panel:

1. Make sure the fan and the lighting are turned off.
2. Press and hold the and buttons for 3 seconds. Fan speed indicators blink once if sounds are enabled and twice if sounds are disabled.

The hood deactivation sound cannot be disabled.

5.5 Remote-control

The appliance is supplied with a remote-control.

Refer to the separate user manual supplied with the remote control.

5.6 WiFi connectivity setup

This feature enables you to connect your appliance to a WiFi network and pair it with your mobile device. Using this feature, you can access additional functions, control and monitor your appliance from your mobile device, and receive notifications.

To connect the appliance you need:

• Wireless network with the Internet connection,
• Mobile device connected to your wireless network.

Frequency/Protocol WiFi: 2.4 GHz / 802.11 bgn

Power WiFi 2.4 GHz: <20 dBm

Encryption WPA-PSK, WPA2-PSK, WPA3-SAE

Installing the app

Take the following steps to connect the appliance to WiFi:

1. Make sure that the appliance is plugged into a power socket and turned on.
2. Make sure that your mobile device is connected to the same wireless network you want to add your appliance to.
3. To download the app, use your mobile device's camera to scan the QR code located on the back cover of the user manual. You can also download the app directly from Google Play (Android) or App Store (iOS).
4. Open the app and register to create an account.

Configuring the appliance wireless connection

Follow the instructions in the app to complete the onboarding process:

1. Make sure the fan and the lighting are turned off.
2. Press and hold ① button on your appliance for 3 seconds, the WiFi indicator flashes continuously. The onboarding process is ongoing.
3. Continue to follow the instructions in the app to complete the onboarding process.

i

To stop the onboarding process, press the ⏻ button.

After the successful onboarding, the WiFi indicator stops flashing and becomes steady.

If the onboarding process is unsuccessful, the WiFi indicator flashes rapidly for 6 seconds and then turns off. Repeat the procedure.

Each time the action is performed using the app, the WiFi indicator blinks 3 times.

Disabling / Enabling the appliance wireless connection

To temporarily disable the WiFi connection:

1. Make sure the fan and the lighting are turned off.
2. Press and hold the 🔒 and ⏻ buttons for 3 seconds. The appliance emits a single beep and the WiFi indicator blinks twice. To enable the WiFi connection again:
3. Make sure the fan and the lighting are turned off.
4. Press and hold the 🔒 and ⏻ buttons for 3 seconds. The appliance emits a single beep and the WiFi indicator blinks once.

Resetting the appliance wireless connection

To offboard the WiFi network, press and hold the band buttons for 3 seconds. The WiFi indicator blinks twice and the appliance emits a single beep upon the successful reset.

This action results in the removal of the appliance from the WiFi network. To re-establish the connection, repeat all the steps described in the 'Configuring the appliance wireless connection' section.

6. CARE AND CLEANING

6.1 Notes on cleaning

Cleaning Agents

Do not use abrasive detergents and brushes.

Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.

After cooking some parts of appliance can get hot. To avoid stains appliance must be cooled down and dried with clean cloth or paper towels.

Clean stains with a mild detergent.

Keep the hood clean

Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or other residue may cause fire.

Grease filters can be washed in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance.

Charcoal filter

The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. Refer to leaflet included in the accessory.

Before carrying out any maintenance, make sure there is no cookware on the hob and that the hood and the hob are disconnected from the power supply.

6.2 Cleaning the grease filter

Filters are mounted with the use of clips and pins on the opposite side.

To clean the filter:

1. Pull the cover to open it.

1. Press the handle of the mounting clip on the filter panel underneath the hood (1).

1. Slightly tilt the front of the filter downwards (2), then pull.

Repeat the first two steps for all filters.

1. Clean the filters using a sponge with non abrasive detergents or in a dishwasher.

The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance.

1. To mount the filters back follow the first two steps in reverse order.

Repeat the steps for all filters if applicable.

6.3 Replacing the charcoal filter - optional

Depending on type, filter can be or cannot be regenerated. Refer to the leaflet provided with the filter.

To replace the filter:

1. Remove the grease filters from the appliance. Refer to "Cleaning the grease filter" in this chapter.
2. Remove the clips holding the filter mat, then the filter mat.

1. To install a filter, perform the same steps in reverse order.

6.4 Replacing the lamp

This appliance is supplied with a LED lamp. This part can be replaced by a technician only. In case of any malfunction refer to "Service" in the "Safety Instructions" chapter.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy
You cannot activate the appliance. The appliance is not connected to a power supply or it is connected incorrectly.		Check if the appliance is correctly connected to the electrical supply.
You cannot activate the appliance. Lack of electrical power supply.		Check the fuse or the main switch. If the fuse or the switch continue to break the circuit, contact a qualified electrician.
The lamp does not operate. The lamp is defective. Contact an Authorised Service Centre.
The brightness level or light colour temperature is not as described in the instructions.	Incorrect Perfect illumination setting.	Using the supplied remote control, check if you are able to change all three colour temperatures.
	The lamp is defective. Contact an Authorised Service Centre.
The appliance does not absorb enough vapours.	The motor speed is not adequate to the appearing vapours.	Increase the speed of the motor.
The App cannot connect to the appliance.	Connectivity issues.	Check the wireless signal.
		Make sure that the wireless connection is on. Refer to "WiFi connectivity setup" chapter.
		Check if your mobile device is connected to the wireless network.
		Check your home network and router.
		Restart the router.
		Contact your wireless service provider if there are further problems with the wireless network.
		The appliance, the mobile device, or both need to be configured again because a new router has been installed or the router configuration has been changed. Refer to "WiFi connectivity setup" chapter.
The App cannot frequently connect to the appliance.	Connectivity issues.	Make sure that the wireless signal reaches the appliance. Try to move the home router as near the appliance as possible or consider purchasing a wireless range extender.
		Make sure the wireless signal is not disrupted by a microwave. Turn the microwave off. Avoid using the microwave and the remote control of the appliance at the same time.

8. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of

appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

1. SAFETY INFORMATION

5. DAILY USE

5.1 Using the hood

1. Press the handle of the mounting clip on the filter panel under the hood (1).

1. Gently tilt the front part of the filter downwards (2), then pull it.

Repeat the first two steps for all filters.

1. Clean the filters with a sponge and non-abrasive detergents or in the dishwasher.

and

1. To install the filter, perform the same steps in reverse order.

6.4 Replacing the bulb

This appliance is supplied with an LED bulb. This part can only be replaced by a technician. In case of any malfunction, refer to "Service" in the "Safety Instructions" chapter.

7. TROUBLESHOOTING

WARNING!

3. Installation

modification of the following text:

7. TROUBLESHOOTING

WARNING!

The Wi-Fi indicator shows the status of the Wi-Fi connection.

1. Press the handle of the mounting clip on the filter panel under the hood (1).

WPA-PSK, WPA2-PSK, WPA3-SAE encryption

1. To install the filter, repeat the same steps in reverse order.

6.4 Replacing the bulb

4. PRODUCT DESCRIPTION

1. Press the handle of the mounting clip on the filter panel under the hood (1).

WPA-PSK, WPA2-PSK, WPA3-SAE encryption

Installing the app

ELECTROLUX APPLIANCES AB

BUSINESS SECTOR EMA-EMEA (SEE)

ST GÖRANSGATAN 143

SE-105 45 STOCKHOLM

SWEDEN

TEL: [phone]

FAX: [phone]

www.electrolux.com

The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project.

To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)