ELECTROLUX

DBGL1032CN - Basket ELECTROLUX - Free user manual and instructions

Find the device manual for free DBGL1032CN ELECTROLUX in PDF.

📄 304 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ELECTROLUX DBGL1032CN - page 61
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Electrolux
Model DBGL1032CN
Product type Kitchen hood
Category Wall-mounted hood
Width 90 cm
Depth 50 cm
Height 60-110 cm (adjustable)
Net weight 12 kg
Power supply 220-240 V, 50 Hz
Motor power 200 W
Energy class A+
Sound level 55 dB (A)
Number of speeds 3
Lighting LED, 2 x 3 W
Suction system Extraction or recirculation
Grease filter Aluminium, washable
Carbon filter Optional, replaceable
Control Push buttons
Repairability Repairability index 8.2/10
Care and cleaning Grease filter dishwasher safe, exterior surface with soft cloth
Safety Automatic shut-off, motor protection

Frequently Asked Questions - DBGL1032CN ELECTROLUX

How to install the DBGL1032CN hood?
Installation must be carried out by a qualified professional. Attach the wall bracket above the hob, then hang the hood respecting safety distances (65 cm min. for electric hob, 75 cm for gas hob). Connect the power supply and the exhaust duct if necessary.
What is the difference between extraction and recirculation modes?
In extraction mode, air is expelled outside via a duct. In recirculation mode, air is filtered by a carbon filter then recirculated into the room. The DBGL1032CN hood can operate in both modes depending on your installation.
How to clean the grease filters?
The aluminium grease filters can be washed in the dishwasher (short cycle at 65°C) or by hand with a degreasing solution. Let them dry completely before reinstalling. Clean them regularly (about every 2 months).
When should the carbon filter be replaced?
If the hood is used in recirculation mode, the carbon filter should be replaced every 3 to 6 months depending on usage. A saturation indicator may be present on some models.
Why is my hood noisy?
Noise can come from poor installation, clogged filters, or an exhaust duct that is too long. Check that all parts are firmly fixed and filters are clean. If noise persists, contact after-sales service.
How to adjust the suction speeds?
Use the push buttons on the front of the hood. The DBGL1032CN model has 3 speeds: the lowest for gentle cooking, the highest for intense odours. A 'boost' key may be available on some models.
What is the lighting power?
The hood is equipped with two LED bulbs of 3 W each, providing efficient and economical lighting. They are difficult to replace; contact a professional if they fail.
How to clean the exterior of the hood?
Use a soft cloth slightly dampened with a mild detergent. Avoid abrasive products, solvents, or rough sponges that could scratch the surface. Dry with a clean cloth.
What is the warranty for the Electrolux DBGL1032CN hood?
Electrolux offers a manufacturer's warranty of 2 years from date of purchase. Keep your receipt. The warranty covers manufacturing defects but not damage due to poor installation or neglected maintenance.
Where can I get spare parts for my hood?
Spare parts (filters, bulbs, motor, etc.) are available from Electrolux after-sales service or specialized websites. Use the model number DBGL1032CN to identify compatible parts.

User questions about DBGL1032CN ELECTROLUX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Basket in PDF format for free! Find your manual DBGL1032CN - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBGL1032CN by ELECTROLUX.

USER MANUAL DBGL1032CN ELECTROLUX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ELECTROLUX

Model : DBGL1032CN

Category : Basket