Touch Pro 126-32 - Earphones SANDBERG - Free user manual and instructions
Find the device manual for free Touch Pro 126-32 SANDBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Wireless In-Ear Earphones |
| Model | Touch Pro 126-32 |
| Brand | Sandberg |
| Connectivity | Bluetooth 5.0 |
| Battery Life | Up to 5 hours (earbuds), additional 20 hours with charging case |
| Charging | USB-C, charging case provides 4 full charges |
| Controls | Touch controls: play/pause, skip tracks, volume, answer calls |
| Driver | Dynamic, 6mm |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 32 Ohms |
| Microphone | Built-in, for calls |
| Water Resistance | IPX4 (splash proof) |
| Weight | 4 g per earbud, 35 g charging case |
| Dimensions (Earbuds) | 25 x 20 x 15 mm |
| Dimensions (Case) | 60 x 40 x 25 mm |
| Compatibility | Smartphones, tablets, computers with Bluetooth |
| Care | Clean with dry cloth; avoid liquids and extreme temperatures |
| Safety | Do not disassemble or expose to heat; keep away from children |
| Spare Parts | Ear tips sizes S/M/L included; replacement not available separately |
| Repair | Not user-serviceable; contact Sandberg support for issues |
Frequently Asked Questions - Touch Pro 126-32 SANDBERG
How do I pair the earphones with my device?
Open the charging case and remove both earbuds. They will enter pairing mode automatically. On your device, enable Bluetooth and select 'Sandberg Touch Pro 126-32' from the list. If prompted, confirm the pairing.
How do I control music playback?
Use touch controls on each earbud. Tap once to play/pause, double-tap to skip forward, triple-tap to go back. Long press to adjust volume (left earbud down, right earbud up).
How long does the battery last?
The earbuds provide up to 5 hours of playback on a single charge. The charging case can recharge them fully about 4 times, giving a total of up to 25 hours of use.
How do I charge the earphones?
Place the earbuds into the charging case. Connect the included USB-C cable to the case and a USB power source. The LED indicator will show charging status. Fully charge takes about 1.5 hours.
Are the earphones waterproof?
The earphones have an IPX4 rating, meaning they are splash resistant. They can withstand sweat and light rain, but should not be submerged in water.
Can I use only one earbud?
Yes, you can use either earbud independently. Remove one from the case and it will connect as a mono headset. To switch to stereo, take out the other earbud.
How do I reset the earphones?
Place both earbuds in the case and close the lid. Press and hold the touch area on both earbuds for 10 seconds until the LED flashes red and white. Then open the lid and they will enter pairing mode.
What should I do if the earphones won't connect?
Ensure the earphones are charged and within range (10 meters). Forget the device in Bluetooth settings, then re-pair. If issues persist, reset the earphones.
How do I clean the earphones?
Wipe the earbuds and case with a soft, dry cloth. Clean the charging contacts with a cotton swab. Do not use liquids or abrasive materials. Remove ear tips and rinse with water, dry thoroughly before reattaching.
What are the earphone specifications?
The Sandberg Touch Pro 126-32 features 6mm dynamic drivers, frequency response 20Hz-20kHz, impedance 32 ohms, Bluetooth 5.0, and IPX4 water resistance.
User questions about Touch Pro 126-32 SANDBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earphones in PDF format for free! Find your manual Touch Pro 126-32 - SANDBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Touch Pro 126-32 by SANDBERG.
USER MANUAL Touch Pro 126-32 SANDBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANDBERG
Model : Touch Pro 126-32
Category : Earphones