LH-053 - Uncategorized Omnitronic - Free user manual and instructions
Find the device manual for free LH-053 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Lighting Fixture |
| Model | LH-053 |
| Brand | Omnitronic |
| Category | DJ / Stage Lighting |
| Power Consumption | 120W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Light Source | 12 x 3W RGB LEDs |
| Beam Angle | 25° |
| Dimmer | 0-100% |
| DMX Channels | 6 / 7 channels |
| Control Modes | DMX512, Master/Slave, Sound Active, Auto |
| Display | LED display with control buttons |
| Dimensions (W x D x H) | 230 x 230 x 280 mm |
| Weight | 2.2 kg |
| Housing | Metal, black |
| Cooling | Fan cooled |
| Mounting | Floor stand or hanging bracket |
| Safety Certification | CE compliant, IP20 indoor use |
| Included Accessories | Power cord, DMX cable, mounting bracket, manual |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use solvents. |
| Repairability | Spare parts available from manufacturer; consult manual for replacement |
| General Information | Professional moving head light; ideal for mobile DJs and small venues |
Frequently Asked Questions - LH-053 Omnitronic
How do I set the DMX address on the Omnitronic LH-053?
Press the Menu button to enter the menu, then use the Up and Down buttons to navigate to DMX Address. Press Enter, set the desired address using the buttons, and press Enter again to confirm.
Can I use the LH-053 without a DMX controller?
Yes, the fixture supports Sound Active and Auto modes. Press the Mode button to cycle through built-in programs or sound activation.
How do I reset the fixture to factory defaults?
Navigate to the Settings menu and select Factory Reset. Confirm with Enter. This will reset all settings to default values.
What is the power consumption of the LH-053?
The power consumption is approximately 120W at full brightness.
How do I replace a broken LED in the LH-053?
LED replacement should be done by a qualified technician. Contact Omnitronic support or an authorized service center for spare parts and repair instructions.
Can I mount the LH-053 on a tripod?
Yes, the fixture has a mounting bracket with a standard 13mm hole for tripod or hanging brackets. Ensure the stand is rated for the weight (2.2 kg).
What is the beam angle of the LH-053?
The beam angle is 25 degrees. Using the included lens filters can alter the beam spread.
How do I clean the LH-053?
Disconnect power and wipe the housing with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. The lens can be cleaned with a microfiber cloth.
What is the maximum number of LH-053 units I can daisy-chain?
The maximum recommended number of fixtures in a single DMX chain is 32 units. For power daisy-chain, refer to the manual for current limits (typically up to 10 units on a 10A circuit).
Why is the LH-053 not responding to DMX?
Check that the DMX cable is properly connected and not damaged. Ensure the DMX controller is set to the same address as the fixture. Verify that the fixture is in DMX mode (not Sound/Auto). If using multiple fixtures, make sure termination is correct on the last unit.
User questions about LH-053 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LH-053 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LH-053 by Omnitronic.
USER MANUAL LH-053 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : LH-053
Category : Uncategorized