LH-125 - Uncategorized Omnitronic - Free user manual and instructions
Find the device manual for free LH-125 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Dimensions (W x D x H) | 200 x 200 x 250 mm |
| Weight | 1.5 kg |
| Power Consumption | 100 W |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Light Source | 12 x 3W RGB LEDs |
| Control Modes | DMX, Sound Active, Master/Slave, Standalone |
| DMX Channels | 4/7 channel selectable |
| Beam Angle | 25° |
| Housing Material | Aluminum and ABS plastic |
| Cooling | Convection, fanless |
| IP Rating | IP20 (indoor use only) |
| Mounting Options | Floor stand or hanging bracket |
| Maintenance | Clean lens with a soft, dry cloth |
| Safety | Use only in dry locations; avoid overheating |
| Spare Parts Availability | LED modules, power supply, and control board available |
| Repairability | Modular design, easy to replace components |
| Warranty | 2 years |
Frequently Asked Questions - LH-125 Omnitronic
How do I connect the LH-125 to a DMX controller?
Use a 3-pin XLR cable to connect the DMX input of the LH-125 to the DMX output of your controller. Set the DMX address using the DIP switches or menu. Refer to the manual for channel mapping.
Can the LH-125 operate without a DMX controller?
Yes, it has sound active and master/slave modes. In sound active mode, it reacts to music via the built-in microphone. In master/slave mode, one unit controls others.
What is the recommended power supply voltage?
The LH-125 accepts AC 100-240 V, 50/60 Hz. Ensure the voltage matches your local supply. Use the provided power cord.
How often should I clean the lens?
Clean the lens whenever dust or smudges are visible, typically every few months. Use a soft, lint-free cloth to avoid scratches.
Can the LH-125 be used outdoors?
No, it is rated IP20 and intended for indoor use only. Exposure to moisture or extreme temperatures may damage the unit.
My LH-125 is not responding to DMX. What should I check?
Check that the DMX cable is properly connected and not defective. Verify the DMX address is correctly set. Ensure the controller is sending data and the unit is set to DMX mode.
What is the maximum number of LH-125 units in master/slave chain?
You can chain up to 32 units in master/slave mode using standard DMX cables. The last unit must be terminated with a 120Ω resistor.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Omnitronic support for assistance if necessary.
What should I do if the unit overheats?
Ensure proper ventilation around the unit. Do not block air vents. If overheating persists, reduce ambient temperature or power off and let it cool down.
Where can I purchase spare parts?
Spare parts such as LEDs, power supply, and control boards are available from authorized Omnitronic dealers. Contact your local distributor.
User questions about LH-125 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LH-125 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LH-125 by Omnitronic.
USER MANUAL LH-125 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : LH-125
Category : Uncategorized