M30 BT TWS - Speaker Tracer - Free user manual and instructions
Find the device manual for free M30 BT TWS Tracer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Model | M30 BT TWS |
| Brand | Tracer |
| Dimensions (H x W x D) | 180 x 70 x 70 mm |
| Weight | 420 g |
| Speaker Type | Full-range stereo |
| Output Power | 10 W (RMS) |
| Bluetooth Version | 5.0 |
| Bluetooth Range | 10 m |
| Battery Capacity | 2000 mAh |
| Playback Time | Up to 8 hours |
| Charging Time | 2-3 hours |
| Charging Port | Micro USB |
| Water Resistance | IPX5 |
| Hands-free Calling | Yes |
| True Wireless Stereo (TWS) | Yes |
| Controls | Buttons for power, volume, playback, pairing |
| LED Indicator | Yes (power and pairing status) |
| Material | Plastic with fabric grille |
| Accessories Included | Micro USB cable, user manual |
| Cleaning | Wipe with a soft, dry cloth. Do not use abrasive cleaners. |
| Safety Note | Do not expose to extreme temperatures or liquids beyond rated IP rating. |
| Spare Parts and Repairability | Contact Tracer customer service for replacement parts. Not user-serviceable. |
Frequently Asked Questions - M30 BT TWS Tracer
How do I pair the Tracer M30 BT TWS with my phone?
Turn on the speaker. The LED will flash blue. Enable Bluetooth on your phone and select 'Tracer M30 BT TWS' from the available devices. The speaker will beep and the LED will stop flashing when paired.
Can I use two M30 speakers together for stereo sound?
Yes, the M30 supports TWS (True Wireless Stereo). Pair one speaker to your phone, then press the TWS button on both speakers to link them. One will act as left channel, the other as right.
What is the battery life and charging time?
The battery lasts up to 8 hours at moderate volume. Full charging takes about 2-3 hours via the Micro USB port.
Is the speaker waterproof?
The speaker has an IPX5 rating, meaning it is splash-proof and can withstand light rain or water jets, but it should not be submerged.
How do I reset the speaker?
If you experience connection issues, press and hold the power button for 10 seconds until the LED turns off. The speaker will reset and you can pair again.
Can I answer calls with this speaker?
Yes, the built-in microphone allows hands-free calling. Press the play/pause button to answer or end a call.
What does the LED indicator mean?
Flashing blue: pairing mode. Solid blue: connected. Red: charging. Off: power off or fully charged.
How do I charge the speaker?
Connect the included Micro USB cable to the charging port on the speaker and a USB power source (e.g., a computer or 5V adapter). The LED turns red while charging and goes off when full.
What audio formats are supported?
The speaker plays all standard Bluetooth audio formats like MP3, AAC, and SBC. It also has a 3.5mm auxiliary input (not included) for wired connection.
How do I clean the speaker?
Unplug the speaker and wipe it with a soft, dry cloth. Avoid using chemicals or abrasive materials. Do not let water enter the charging port.
User questions about M30 BT TWS Tracer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual M30 BT TWS - Tracer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M30 BT TWS by Tracer.
USER MANUAL M30 BT TWS Tracer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tracer
Model : M30 BT TWS
Category : Speaker