Splash L BT TWS - Speaker Tracer - Free user manual and instructions
Find the device manual for free Splash L BT TWS Tracer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | Tracer |
| Model | Splash L BT TWS |
| Connectivity | Bluetooth 5.0 with TWS pairing |
| Dimensions (W x H x D) | 200 mm x 100 mm x 100 mm |
| Weight | 500 g |
| Power Source | Rechargeable Li-ion battery, 2000 mAh, USB-C charging |
| Battery Life | Up to 10 hours at moderate volume |
| Water Resistance | IPX7 (fully submersible up to 1 m for 30 min) |
| Speaker Type | Full-range driver with passive radiator |
| Output Power | 10 W RMS |
| Frequency Response | 80 Hz - 20 kHz |
| Microphone | Built-in for hands-free calls |
| Controls | Power, volume, play/pause, call, TWS pairing button |
| Supported Audio Formats | MP3, WAV, AAC, FLAC |
| Charging Time | Approximately 3 hours via USB-C |
| Cleaning Instructions | Wipe with a soft, damp cloth; avoid solvents; dry thoroughly after water exposure |
| Safety Notes | Do not expose to extreme temperatures; keep away from children; use only provided charger |
| Repairability | Battery replacement by qualified technician; no user-serviceable parts |
Frequently Asked Questions - Splash L BT TWS Tracer
How do I pair two Splash L speakers for TWS mode?
Turn on both speakers. On one speaker, press the TWS button (usually indicated by a chain icon) until you hear a confirmation tone. The speakers will automatically connect. If not, ensure no other Bluetooth device is connected.
Can I use the speaker while it's charging?
Yes, you can use the speaker while charging, but it may reduce battery longevity. For optimal battery life, charge fully before use.
Is the speaker truly waterproof?
Yes, it has an IPX7 rating, meaning it can be submerged in up to 1 meter of fresh water for 30 minutes. However, salt water is not recommended; rinse with fresh water after exposure.
How do I reset the speaker?
If the speaker is unresponsive, press and hold the Power button for about 10 seconds until the LED turns off and back on. This resets the Bluetooth and restores factory settings.
What does the LED indicator mean?
Solid blue: connected. Flashing blue: pairing mode. Red: charging. Off: charged or off. Refer to the manual for exact details.
Can I use the speaker with a non-Bluetooth device?
The speaker only supports Bluetooth input. For wired connection, you may need an auxiliary input (3.5 mm jack) if available. This model does not include a wired input, so use Bluetooth only.
How do I clean the speaker after use in wet conditions?
Wipe the speaker with a soft, damp cloth. Ensure the charging port cover is securely closed. Do not use abrasive cleaners or solvents. Allow to air dry completely before charging.
What is the Bluetooth range?
With Bluetooth 5.0, the range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce range.
How do I charge the speaker?
Use the included USB-C cable and a standard USB power adapter (5V/1A). Connect to the charging port and the LED will turn red. Full charge takes about 3 hours.
Why is the playback volume low?
Check the volume level on both the speaker and your connected device. Also ensure the speaker is not in a sound-absorbing environment. If using TWS with two speakers, the volume is controlled individually.
User questions about Splash L BT TWS Tracer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Splash L BT TWS - Tracer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Splash L BT TWS by Tracer.
USER MANUAL Splash L BT TWS Tracer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tracer
Model : Splash L BT TWS
Category : Speaker