DFR452 - Screwdriver MAKITA - Free user manual and instructions
Find the device manual for free DFR452 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drywall screwdriver |
| Brand | Makita |
| Model | DFR452 |
| Power source | 18 V Li-ion battery |
| Battery type | Makita LXT 18 V (sold separately) |
| Charger capacity | Quick charger DC18RC or similar (not included) |
| No-load speed | 0 - 4000 rpm |
| Screwing torque | Not specified, clutch adjustment |
| Screw feeder | Automatic feeder for drywall screw strips |
| Screw feeder capacity | Up to 150 screws (length 25-55 mm) |
| Screwing depth | Adjustable by depth stop |
| Weight (without battery) | Approximately 1.5 kg |
| Dimensions (L x W x H) | Approximately 280 x 80 x 230 mm |
| Noise level | LpA : 85 dB(A), K=3 dB(A) |
| Vibration level | ah : 2.5 m/s², K=1.5 m/s² |
| Main functions | Automatic screwing of plasterboard, strip loading, depth adjustment, on/off |
| Maintenance and cleaning | Clean the screw feeder and cooling vents regularly; do not use solvents |
| Safety | Motor brake, shaft lock, insulated handle, protective circuit breaker |
| Spare parts and repairability | Available through Makita authorized service network; screw feeder, depth stop, motor brushes |
| General information | Designed for plasterboard, continuous screwing; uses collated screw strips |
Frequently Asked Questions - DFR452 MAKITA
Which battery is compatible with the Makita DFR452 screwdriver?
The Makita DFR452 uses 18 V Li-ion batteries from the LXT series, compatible with the entire Makita 18 V range, such as BL1815N, BL1830B, etc.
How to adjust the screwing depth on the DFR452?
Turn the depth stop located on the nose of the screwdriver. Fine adjustment allows automatic stop when the screw is flush with the surface.
Can individual screws be used instead of strips?
No, the DFR452 is designed exclusively for collated screw strips (drywall screw strips). It cannot load individual screws.
How to clean the screw feeder?
Remove the screw feeder and blow compressed air to remove plaster dust. Clean the guides with a dry cloth. Do not use lubricant or solvent.
What to do if the screwdriver does not start?
Check that the battery is charged and properly inserted. If the problem persists, check the battery fuse or the motor condition. Consult an authorized repairer if necessary.
What is the capacity of the screw feeder?
The integrated feeder can hold up to 150 screws with a length between 25 and 55 mm, depending on the strip type used.
Is the DFR452 equipped with a motor brake?
Yes, a motor brake quickly stops the tool rotation when the trigger is released, for added safety.
How to change the motor brushes?
The brushes are accessible through the side caps. Unscrew the caps, remove the old brushes, and insert new ones. Tighten moderately. Use original Makita brushes.
What are the dimensions of the DFR452 screwdriver?
Without battery, the tool measures approximately 280 x 80 x 230 mm (length x width x height). Weight is about 1.5 kg.
Where to find spare parts or service?
Contact an authorized Makita service center or visit the official Makita website to find a repairer near you. Parts such as the screw feeder, depth stop, and brushes are available.
User questions about DFR452 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual DFR452 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFR452 by MAKITA.
USER MANUAL DFR452 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DFR452
Category : Screwdriver