DFL402R - Screwdriver MAKITA - Free user manual and instructions
Find the device manual for free DFL402R MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Screwdriver |
| Brand | Makita |
| Model | DFL402R |
| Power Source | Li-ion 18V Battery |
| Battery Capacity | 3.0 Ah |
| Max Torque | 30 Nm |
| No Load Speed | 0 - 2000 rpm |
| Chuck | Keyless (self-tightening) |
| Screw Capacity | Screws up to 6 mm |
| Weight | 1.6 kg |
| Dimensions (L × W × H) | 200 × 70 × 230 mm |
| Sound Level | 72 dB(A) |
| Vibrations | 2.5 m/s² |
| Main Functions | Screwing and Unscrewing |
| Safety | Motor brake, spindle lock |
| Maintenance | Clean with a dry cloth |
| Spare Parts | Available from Makita after-sales service |
| General Information | 1 year warranty |
Frequently Asked Questions - DFL402R MAKITA
How to change the drill bit in the chuck?
Turn the chuck ring counterclockwise to open the jaws. Insert the bit, then tighten manually by turning clockwise. Ensure the bit is centered and held firmly.
Which battery to use with the DFL402R?
Use only Makita Li-ion 18V LXT series batteries, such as models BL1815, BL1820, BL1830, etc. Never use batteries from other brands or with different voltages.
How to adjust the torque setting?
The DFL402R screwdriver has a torque adjustment ring with multiple positions. Turn the ring to select the appropriate torque for your work. A higher number corresponds to a stronger torque. Start with a low setting to avoid damaging screws or material.
How to clean the screwdriver?
Disconnect the battery. Wipe the outside of the screwdriver with a soft, dry cloth. Do not use solvents or water. For ventilation slots, use a soft brush or compressed air.
What to do if the screwdriver does not start?
Check that the battery is properly inserted and charged. If the battery is empty, recharge it. Make sure the safety lock is not engaged. If the problem persists, contact Makita after-sales service.
How to store the screwdriver?
Store the screwdriver in a dry, dust-free place, preferably in its original case. Remove the battery for long-term storage. Avoid extreme temperatures (below 0°C or above 40°C).
Can I use accessories from other brands?
It is recommended to use original Makita accessories to ensure safety and performance. However, standard 6 mm drill bits and bits can be used. Check compatibility before use.
How to know when to recharge the battery?
The screwdriver has a charge indicator on the battery (LED). When the battery is low, the LED flashes or turns off. Recharge the battery as soon as performance decreases. Do not let the battery fully discharge.
Is the screwdriver protected against overloads?
Yes, the DFL402R is equipped with an electronic protection system that cuts off power in case of overload or jamming. This protects the motor and battery. If the protection activates, release the trigger and remove the cause of the jamming.
Where to find spare parts for the DFL402R?
Spare parts are available from authorized Makita service centers. You can also order online from the official Makita website or authorized dealers. Have the model number ready.
User questions about DFL402R MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual DFL402R - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFL402R by MAKITA.
USER MANUAL DFL402R MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DFL402R
Category : Screwdriver