KGSZ 210 - Saw EINHELL - Free user manual and instructions
Find the device manual for free KGSZ 210 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sliding Compound Miter Saw |
| Brand | Einhell |
| Model | KGSZ 210 |
| Blade Diameter | 210 mm |
| Power Input | 1500 W |
| No-Load Speed | 5000 min⁻¹ |
| Cutting Capacity (90°) | 120 x 60 mm |
| Maximum Miter Angle | 45° (left/right) |
| Maximum Bevel Angle | 45° (left) |
| Table Size | 540 x 380 mm |
| Weight | 11.5 kg |
| Power Supply | 230 V, 50 Hz |
| Dust Extraction Connection | 35 mm |
| Laser Cut Guide | Yes |
| Workpiece Clamp | Yes |
| Spindle Lock | Yes |
| Maintenance | Clean with dry cloth; check carbon brushes annually |
| Safety Features | Blade guard, safety switch, anti-kickback |
| Replacement Parts | Blade, carbon brushes, dust bag (available from Einhell service) |
Frequently Asked Questions - KGSZ 210 EINHELL
What is the maximum cutting depth of the Einhell KGSZ 210?
At 90° cross cut, the maximum cutting depth is 60 mm and the maximum cutting width is 120 mm. At 45° miter, the depth reduces to approximately 40 mm.
How do I adjust the miter angle on the KGSZ 210?
Loosen the miter lock lever, rotate the saw table to the desired angle (0° to 45° left/right), and retighten the lever. The table has positive stops at common angles like 0°, 15°, 22.5°, 30°, and 45°.
Can I use the saw for bevel cuts?
Yes, the KGSZ 210 allows bevel cuts up to 45° to the left. To adjust, loosen the bevel lock, tilt the saw head, and retighten. For compound cuts, combine miter and bevel settings.
What type of blade does the KGSZ 210 use?
It uses a 210 mm diameter blade with a 30 mm bore. The blade should be suitable for wood or metal depending on the application. Always use a sharp blade rated for the saw's maximum speed.
How do I replace the carbon brushes?
Unplug the saw. Locate the brush caps on the motor housing, unscrew them, and remove the old brushes. Insert new brushes (available as spare parts), ensuring they slide freely, then replace caps. Run the saw for a few minutes to seat the brushes.
Why is the laser guide not working?
Check the battery compartment (usually under the handle) for two AAA batteries. Replace if dead. Ensure the laser switch is on. If still not working, clean the laset lens with a soft cloth. If the laser is damaged, contact Einhell service.
How do I connect a dust extractor?
Attach a vacuum hose (35 mm diameter) to the dust extraction port located at the rear of the saw. Use a compatible dust extractor or vacuum cleaner with the appropriate adapter. This significantly reduces airborne dust.
What is the recommended cutting speed for metal?
For metal, use a ferrous or non-ferrous metal cutting blade and reduce the feed rate. Do not force the saw. The saw's no-load speed is 5000 min⁻¹, which is suitable for most metal blades. Ensure the workpiece is securely clamped.
How do I store the KGSZ 210 safely?
Always unplug the saw and allow it to cool. Retract the blade guard and lock the saw head in the transport position. Store in a dry place, preferably with a cover to protect from dust. Keep away from children.
What spare parts are available for the KGSZ 210?
Common spare parts include saw blades, carbon brushes, dust bags, and replacement laser units. Contact Einhell service or authorized dealers. Always use genuine Einhell parts for safety and performance.
User questions about KGSZ 210 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual KGSZ 210 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KGSZ 210 by EINHELL.
USER MANUAL KGSZ 210 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : KGSZ 210
Category : Saw