FORTEXXA 18/35 - Saw EINHELL - Free user manual and instructions
Find the device manual for free FORTEXXA 18/35 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Circular Saw |
| Brand | Einhell |
| Model | FORTEXXA 18/35 |
| Battery Voltage | 18 V |
| Blade Diameter | 165 mm |
| Cutting Depth at 90° | 55 mm |
| Cutting Depth at 45° | 40 mm |
| No-load Speed | 4500 rpm |
| Weight | 3.2 kg (without battery) |
| Dimensions (L x W x H) | 350 x 250 x 280 mm |
| Power Supply | 18 V Li-Ion battery (Power X-Change) |
| Main Functions | Bevel cuts up to 45°, spindle lock, LED lighting |
| Maintenance and Cleaning | Clean blade and housing after each use, lubricate moving parts |
| Safety | Automatic blade brake, anti-restart protection, protective guard |
| Spare Parts and Repairability | Spare parts available via Einhell customer service, easy repairability |
| General Information | Belongs to Power X-Change system, compatible with all Einhell 18 V batteries |
Frequently Asked Questions - FORTEXXA 18/35 EINHELL
Which battery is compatible with the FORTEXXA 18/35?
The saw uses Einhell's Power X-Change 18 V batteries. All batteries in this range are compatible, regardless of amperage.
How to change the saw blade?
Use the spindle lock to immobilize the shaft, then loosen the center screw with the supplied Allen key. Replace the blade and tighten. Pay attention to the rotation direction.
What is the maximum cutting depth?
Cutting depth is 55 mm at 90° and 40 mm at 45°.
Can I use the saw without a battery?
No, the FORTEXXA 18/35 is a cordless saw and requires an 18 V Power X-Change battery to operate.
How to adjust the cutting angle?
Unlock the bevel lever at the front, tilt the base to the desired angle (from 0° to 45°), then relock.
Does the saw have a blade brake?
Yes, it is equipped with an automatic blade brake that stops the blade within seconds after releasing the trigger.
What to do if the saw does not start?
Check that the battery is charged and properly inserted. If the problem persists, refer to the troubleshooting section of the manual.
How to clean the saw?
Use a damp cloth to clean the housing and base. Do not use solvents. The blade can be cleaned with a resin remover.
Where to find spare parts for this model?
Spare parts are available from Einhell customer service or on the official website. Use the model number FORTEXXA 18/35 to identify parts.
Is this saw compatible with guide rails?
No, the FORTEXXA 18/35 is not designed to be used with guide rails. It is suitable for freehand cuts.
User questions about FORTEXXA 18/35 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FORTEXXA 18/35 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FORTEXXA 18/35 by EINHELL.
USER MANUAL FORTEXXA 18/35 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : FORTEXXA 18/35
Category : Saw