TC-TS 8 I - Saw EINHELL - Free user manual and instructions
Find the device manual for free TC-TS 8 I EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Einhell |
| Model | TC-TS 8 I |
| Product type | Table circular saw |
| Rated power | 1800 W |
| Blade diameter | 210 mm |
| No-load speed | 5000 rpm |
| Cutting depth at 90° | 70 mm |
| Cutting depth at 45° | 45 mm |
| Table dimensions | 500 x 400 mm |
| Device dimensions (L x D x H) | 600 x 500 x 350 mm |
| Weight | 18 kg |
| Supply voltage | 230 V / 50 Hz |
| Mitre cut function | Yes, up to 45° |
| Laser guide | Not included (optional) |
| Dust extraction system | Connection for vacuum cleaner |
| Blade guard | Adjustable guard |
| Emergency stop | Yes |
| Maintenance and cleaning | Regularly clean sawdust and residues; check the blade; lubricate moving parts |
| Spare parts | Replacement blades, guides, protective covers |
| Warranty | 2 years |
| Included accessories | Circular blade, parallel guide, blade key |
Frequently Asked Questions - TC-TS 8 I EINHELL
How to change the saw blade?
To change the blade, first unplug the device. Use the supplied blade key to loosen the fixing nut. Remove the old blade and install the new one, paying attention to the direction of rotation. Tighten the nut and check that the blade turns freely.
How to adjust the cutting depth?
Loosen the locking lever of the cutting depth located under the table. Turn the adjustment wheel to raise or lower the blade. Tighten the lever once the desired depth is reached. Check on a test piece.
How to use the parallel guide?
Insert the parallel guide into the table grooves. Adjust the distance between the guide and the blade using the scale. Lock the guide by tightening the knobs. For a straight cut, hold the workpiece against the guide.
The saw does not start, what to do?
First check that the power outlet is working and that the power cord is not damaged. Make sure the safety switch is in the on position. If the problem persists, consult an authorized after-sales service.
How to clean the saw after use?
Unplug the device. Use a vacuum cleaner to remove sawdust from the table and housing. Clean the blade with a damp cloth. Never use harsh solvents. Check the ventilation openings.
What are the safety instructions?
Always wear safety glasses and hearing protection. Use the push stick for small pieces. Do not wear loose clothing. Keep children at a distance. Read the user manual completely.
How to make a mitre cut?
Loosen the locking handle of the mitre angle. Tilt the table or blade to the desired angle (up to 45°). Tighten the handle. Use the mitre guide if available. Make a test cut.
The blade jams, what to do?
If the blade jams, immediately release the switch. Identify the cause: blade deformation, material too hard, or improper feed. Unplug the device and remove the jammed piece. Check the condition of the blade.
Where to find spare parts?
Spare parts are available from Einhell authorized dealers or on the official website. Use the exact model TC-TS 8 I to order. Common parts like blades are widely available.
How to adjust the longitudinal stop?
The longitudinal stop is adjusted by loosening the fixing screws on the guide. Position the guide at the desired distance by measuring between the stop and the blade. Tighten the screws. Check parallelism.
User questions about TC-TS 8 I EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual TC-TS 8 I - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-TS 8 I by EINHELL.
USER MANUAL TC-TS 8 I EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TC-TS 8 I
Category : Saw