FDW 82914 PB - Dishwasher Fulgor Milano - Free user manual and instructions
Find the device manual for free FDW 82914 PB Fulgor Milano in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | Fulgor Milano |
| Model | FDW 82914 PB |
| Energy class | A+ |
| Capacity | 14 place settings |
| Dimensions (W x H x D) | 60 x 85 x 60 cm |
| Net weight | 45 kg |
| Tension / Frequency | 220-240 V / 50 Hz |
| Power consumption | 1900 W |
| Water pressure | 0.03-1.0 MPa |
| Water consumption per cycle | 10 L |
| Noise level | 44 dB(A) |
| Number of programs | 6 (Eco, Intensive, Normal, Quick, Pre-wash, Auto) |
| Basket material | Stainless steel |
| Delayed start | Yes (1-24 h) |
| Child safety lock | Yes (combined button) |
| Salt and rinse aid indicator | Yes |
| Filter | Cleanable, stainless steel |
| Wash arms | Rotating, removable |
| Manufacturing | Italy |
| Repairability index | 7.8 / 10 |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - FDW 82914 PB Fulgor Milano
How to correctly install my Fulgor Milano FDW 82914 PB dishwasher?
Make sure the appliance is level and properly stabilized. Connect the water supply (pressure 0.03-1.0 MPa) and the drain. Plug into a 220-240 V / 50 Hz outlet. Refer to the installation diagram in the manual.
What to do if error code E10 appears?
Error code E10 indicates a water filling problem. Check that the water supply tap is open, that the hose is not kinked, and that the inlet filter is not clogged.
How to clean the dishwasher filter?
Remove the lower basket, unscrew the central (cylindrical) filter and rinse it under running water. Also clean the flat filter. Reassemble correctly. Do this monthly.
What type of regeneration salt to use?
Use special dishwasher salt, coarse grains. Never use table salt. Pour into the designated reservoir (under the lower basket) until the light goes out.
Why is the dishes not drying well?
Check that the rinse aid is sufficient and the dosage is correct. Use a program with drying (e.g., Eco with drying). Open the door at the end of the cycle to speed up drying.
How to activate the child lock?
Simultaneously press and hold the 'Delayed start' and 'Program' buttons for 3 seconds until the lock symbol appears. To deactivate, repeat the operation.
Which products should not be used in the dishwasher?
Do not use bleach-based products, solvents, or foaming hand-washing detergents. Avoid 3-in-1 tablets if the water is very hard.
How to adjust water hardness?
Refer to the manual to access the setting. Use a test strip to measure hardness. Set between 1 (soft) and 5 (very hard). Proper adjustment optimizes salt consumption.
What to do if the dishwasher does not start?
Check that the door is properly closed, a program is selected, and the appliance is powered on. Make sure the child lock is not activated. If the problem persists, contact after-sales service.
Where to find the complete user manual?
The complete manual can be downloaded for free from notice-facile.com. You can also request a translation in your language via the form on the product page.
User questions about FDW 82914 PB Fulgor Milano
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual FDW 82914 PB - Fulgor Milano and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDW 82914 PB by Fulgor Milano.
USER MANUAL FDW 82914 PB Fulgor Milano
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fulgor Milano
Model : FDW 82914 PB
Category : Dishwasher