PLHLG 2000 A1 - Uncategorized PARKSIDE - Free user manual and instructions
Find the device manual for free PLHLG 2000 A1 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric hedge trimmer |
| Brand | Parkside |
| Model | PLHLG 2000 A1 |
| Power supply | Mains electric, 230 V ~ 50 Hz |
| Rated power | 2000 W |
| Cutting length | Approx. 50 cm |
| Blade type | Hardened steel, double blade |
| Cutting speed | Variable depending on trigger pressure |
| Dimensions (L x W x H) | Approx. 95 x 20 x 15 cm |
| Weight | Approx. 3.5 kg |
| Sound level | LpA ≤ 90 dB(A), K=3 dB(A) |
| Vibration | ah ≤ 2.5 m/s², K=1.5 m/s² |
| Power cord | With anti-pinch protection |
| Safety | Safety stop when trigger is released; blade guard |
| Maintenance and cleaning | Clean blades with a brush after use; lubricate regularly |
| Spare parts and repairability | Available via Parkside after-sales service; repairable (repairability index not communicated) |
| Included accessories | Blade guard, cutting guide, user manual |
| Intended use | Trimming hedges, shrubs and bushes in private gardens |
Frequently Asked Questions - PLHLG 2000 A1 PARKSIDE
How to change the blade of the PLHLG 2000 A1 hedge trimmer?
Unplug the device. Remove the blade fixing screws, install the new blade respecting the cutting direction, then screw back. Lightly lubricate the blades before first use.
What oil to use for Parkside hedge trimmer blades?
Use a specific lubricating oil for garden tools, preferably biodegradable. Apply a few drops to the blade teeth after each use and before storage.
The hedge trimmer does not start, what should I do?
First check that the device is properly plugged in and the cable is not damaged. Make sure the safety trigger is pressed. If the problem persists, check the plug fuse or contact customer service.
Can I use the PLHLG 2000 A1 to cut thick branches?
No, this hedge trimmer is designed for branches with a maximum diameter of about 20 mm. For thicker branches, use a pruner or saw.
How to maintain the hedge trimmer after prolonged use?
Unplug the device, clean the blades with a stiff brush, remove plant debris. Check the tightness of the screws and lubricate the blades. Store the device in a dry and dust-free place.
Is the sound level of the hedge trimmer high?
The sound level is about 90 dB(A). Always wear hearing protection during use to avoid any risk of hearing damage.
Where to find spare parts for the PLHLG 2000 A1?
Spare parts are available from Parkside after-sales service (via the website or Lidl stores). You can also consult the manual for part references.
Can I use an extension cord?
Yes, use an extension cord suitable for outdoor use (type H07RN-F) with a wire cross-section of at least 1.5 mm². Fully unroll the extension cord to avoid overheating.
How to adjust the cutting speed?
This model is equipped with a progressive trigger: the more you press, the higher the speed. Some models have an electronic speed control; refer to the manual for details.
What to do if the blade gets stuck while cutting?
Immediately release the trigger and unplug the device. Remove stuck branches with a stick or pliers. Never force the blade.
User questions about PLHLG 2000 A1 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PLHLG 2000 A1 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLHLG 2000 A1 by PARKSIDE.
USER MANUAL PLHLG 2000 A1 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PLHLG 2000 A1
Category : Uncategorized