PMFW 310 E3 - Uncategorized PARKSIDE - Free user manual and instructions
Find the device manual for free PMFW 310 E3 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Multifunction tool |
| Brand | Parkside |
| Model | PMFW 310 E3 |
| Rated power | 310 W |
| Supply voltage | 230 V ~ 50 Hz |
| No-load speed | 11000 - 20000 rpm (variable) |
| Oscillating stroke | 2.8 mm |
| Oscillation angle | 1.4° (left/right) |
| Dimensions (L x W x H) | Approx. 35 x 8 x 12 cm |
| Weight | Approx. 1.3 kg |
| Sound pressure level | 82 dB(A) |
| Sound power level | 93 dB(A) |
| Hand-arm vibration | < 2.5 m/s² (typical value) |
| Main functions | Sawing, sanding, scraping, polishing |
| Included accessories | 1 segment saw blade, 1 plunge saw blade, 1 abrasive paper (assorted), 1 sanding pad |
| Accessory attachment type | Tool-free (quick-clamping system) |
| Electronic speed control | Yes |
| Ergonomic handle | With non-slip coating |
| On/off switch | With lock-on function |
| Maintenance and cleaning | Clean ventilation slots with a brush; do not use solvents |
| Safety | Double insulation, safety stop in case of tool jamming |
| Spare parts and repairability | Available via Parkside after-sales service (IAN number 345678_2104) |
| General information | Domestic use, do not immerse in water |
Frequently Asked Questions - PMFW 310 E3 PARKSIDE
How to change the accessory on the PMFW 310 E3?
Turn the quick-release ring counterclockwise to loosen, insert the accessory, then tighten by hand. Caution: Always unplug the tool before changing accessories.
What is the power of the Parkside PMFW 310 E3?
The motor delivers 310 W, which is sufficient for light to medium sawing, sanding, and scraping work.
Can I use the tool to cut tiles?
No, this tool is not designed for tile cutting. Use it only on wood, plastic, nails, screws, and soft materials. For tiles, a specific accessory (diamond blade) may be available, but check compatibility.
How to adjust the tool speed?
Use the speed adjustment wheel located on top of the appliance. Turn it from 1 (minimum speed) to 6 (maximum speed) to adapt the speed to the material.
Is the PMFW 310 E3 very noisy?
The sound pressure level is approximately 82 dB(A). Always wear hearing protection when using.
What to do if the tool does not start?
First check that the socket works and the cable is not damaged. If the tool still does not start, the carbon brushes may be worn. Contact Parkside after-sales service.
How to clean the tool after use?
Unplug the tool. Use a brush to clean the ventilation slots and a damp cloth for the outer surface. Do not use solvents or abrasive products.
What accessories are included with the PMFW 310 E3?
The package contains: one segment saw blade, one plunge saw blade, one sanding pad with several abrasives, and a tightening key (if applicable). Refer to the manual for the exact list.
Can I use the tool continuously for a long time?
The tool is designed for intermittent use. For prolonged use, take breaks every 15 minutes to avoid motor overheating.
Where can I find spare parts for the PMFW 310 E3?
Spare parts are available from Parkside after-sales service. Refer to the IAN number in the manual (e.g. IAN 345678_2104) to order.
User questions about PMFW 310 E3 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PMFW 310 E3 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PMFW 310 E3 by PARKSIDE.
USER MANUAL PMFW 310 E3 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PMFW 310 E3
Category : Uncategorized