HNS61222NAW - Refrigerator BEKO - Free user manual and instructions

Product Type	Freestanding Fridge-Freezer
Energy Class	F
Total Net Capacity	250 L
Fridge Net Capacity	180 L
Freezer Net Capacity	70 L
Freezer Star Rating	4 Stars
Dimensions (H x W x D)	177.5 x 54.0 x 54.5 cm
Weight	52 kg
Noise Level	40 dB
Climate Class	SN-ST
Defrost System	Auto Defrost (Fridge), Manual (Freezer)
Cooling System	Static Cooling
Control Type	Mechanical Knob
Adjustable Shelves	Yes, 2 tempered glass shelves
Crisper Drawer	1 humidity-controlled drawer
Door Reversibility	Yes, reversible door
Annual Energy Consumption	250 kWh/year
Voltage / Frequency	220-240 V / 50 Hz
Refrigerant	R600a
Maintenance	Clean condenser coils annually, replace door seals if worn
Safety Features	Anti-tip brackets, child lock for freezer (if applicable)
Spare Parts Availability	Thermostat, shelves, door bins, and handles available online
Repairability Index	7.5/10 (common parts, DIY-friendly)

Frequently Asked Questions - HNS61222NAW BEKO

How do I adjust the temperature on my Beko HNS61222NAW?

Use the thermostat dial inside the fridge compartment. Turn it clockwise for colder settings (higher number) and counterclockwise for warmer. Typically, setting 3-4 is recommended for normal use.

What should I do if the fridge is not cooling properly?

Check if the thermostat is set correctly, ensure the door seals are clean and tight, and verify that the condenser coils (at the back) are not dusty. Also, allow 24 hours for the temperature to stabilize after installation or after loading with food.

How often should I defrost the freezer?

Defrost the freezer compartment when ice build-up reaches about 5 mm (0.2 inches). To defrost, remove food, unplug the appliance, and leave the door open. Do not use sharp tools to remove ice.

Can I reverse the door of my Beko fridge?

Yes, the door is reversible. Follow the instructions in your manual: unplug, unscrew hinges, and reposition them on the opposite side. You may need a screwdriver and spanner.

Why is there water pooling inside the fridge?

The defrost drain might be blocked. Clean it with a pipe cleaner or warm water. Also check if the drain hole is not covered by food items.

What is the recommended temperature for the fridge and freezer?

Set the fridge to 4°C (39°F) and the freezer to -18°C (0°F). Use a separate thermometer to verify.

How do I clean the condenser coils?

Unplug the refrigerator. Use a vacuum cleaner with a brush attachment or a soft brush to gently remove dust from the coils at the back. Do this every 6-12 months.

The fridge is making unusual noises. Is that normal?

Some noises are normal: gurgling (refrigerant flow), clicking (thermostat), and humming (compressor). If you hear loud banging or persistent rattling, check if the appliance is level or if items inside are vibrating.

What spare parts are commonly needed for this model?

Commonly replaced parts include door seals, thermostat, shelves, and door bins. You can order them from Beko's official website or authorized dealers.

How can I increase the energy efficiency of my fridge?

Keep the fridge away from heat sources (oven, direct sunlight), ensure door seals are intact, avoid overloading, and defrost regularly. Also, allow air circulation around the coils.

USER MANUAL HNS61222NAW BEKO

HNS 61222 NAW

HNS 61222 NAX

EN - RO - SR - SQ - BG - HR - MK

CONTENTS

ENGLISH	03-16
ROMÂNĂ	17-34
СРПСКИ	35-50
SHQIPTARE	51-63
БЪЛГАРСКИ	64-79
HRVATSKI	80-92
МАКЕДОНСКИ	93-108

Please read this user manual first!

Dear Valued Customer,

Thank you for preferring this Beko appliance. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the-art technology. For this reason, please read this entire user manual and all other accompanying documents carefully before using the appliance and keep it as a reference for future use. If you handover the appliance to someone else, give the user manual as well. Follow the instructions by paying attention to all the information and warnings in the user manual.

Remember that this user manual may also apply to other models. Differences between models are explicitly described in the manual.

Meanings of the Symbols

Following symbols are used in various sections of this user manual:

Important information and useful hints about usage.

WARNING: Warnings against dangerous situations concerning the security of life and property.

WARNING: Warning for danger of fire.

WARNING: Warning for electric shock.

1 Important safety and environmental instructions

1.1 General Safety

Important Safety Instructions Read Carefully And Keep For Future Reference This section contains safety instructions that will help protect from risk of fire, electric shock, exposure to leak microwave energy, personal injury or property damage. Failure to follow these instructions shall void any warranty.

• Beko products comply with the applicable safety standards; therefore, in case of any damage on the appliance or power cable, it should be repaired or replaced by the dealer, service center or a specialist and authorized service alike to avoid any danger. Faulty or unqualified repair work may be dangerous and cause risk to the user.

• This appliance is intended to be used in household

and similar applications such as:

- Staff kitchen areas in shops, offices and other working environments; - Farm houses - By clients in hotels, and other residential type environments; - Bed and Breakfast type environments.

- Operate the appliance for its intended purpose only as described in this manual.

• The manufacturer cannot be held liable for damages resulting from improper installation or misuse of the product.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been

1 Important safety and environmental instructions

given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not be allowed to play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood must be not less than 50 cm from electric cookers and 65 cm from gas or mixed cookers.

- If the instructions for installation for the gas hob specify a greater distance, this has to be taken into account.

- Make sure that your mains power supply complies with the information supplied on the rating plate of

the appliance.

- Never use the appliance if the power cable or the appliance itself is damaged.

- Prevent damage to the power cable by not squeezing, bending, or rubbing it on sharp edges. Keep the power cable away from hot surfaces and naked flame.

- Use the appliance with a grounded outlet only.

WARNING: Do not connect the appliance to the mains until the installation is fully complete.

- Place the appliance in a way so that the plug is always accessible.

- Do not touch the lamps if they have operated for a long time. They can burn your hands since they will be hot.

- Follow the regulations set out by competent authorities on discharge of the exhaust air (this warning

1 Important safety and environmental instructions

is not applicable for use without flue).

- Operate your appliance after putting a pot, pan etc. on the hob. Otherwise, high heat may cause deformation in some parts of your product.

- Turn off the hob before taking the pot, pan etc. from it.

- Do not leave hot on the hob. Pans with hot may cause self combustion.

- Pay attention to your curtains and covers since may catch fire while cooking food such as fries.

- Grease filter must be cleaned at least monthly. Carbon filter must be replaced at least every 3 months.

- Product shall be cleaned in accordance with the user manual. If cleaning was not carried out in accordance with the user manual, there may be a fire risk.

- Do not use non-fire-resistant filtering materials instead of the current filter.

- Only use the original parts or parts recommended by the manufacturer.

- Do not operate the product without the filter and do not remove the filters while the product is running.

• In the event of any flame, de-energize your product and cooking appliances.

- In the event of any flame, cover the flame and never use water to extinguish.

- Unplug the appliance before each cleaning and when the appliance is not in use.

• The negative pressure in the environment should not exceed 4 Pa (4x10 bar) while the hood for electric hob and appliances running on another type of

1 Important safety and environmental instructions

energy but electricity operate simultaneously.

• In the environment where the appliance is being used, the exhaust of devices running on fuel or gas, such as room heater, must be absolutely isolated or the device must be hermetical type.

- When connecting the flue, use pipes with a diameter of 120 or 150 mm. Pipe connection must be as short as possible and have as few elbows as possible.

Danger of choking! Keep all the packaging materials away from children.

CAUTION: Accessible parts may become hot when used with cooking appliances.

• The product outlet must not be connected to air channels that include other smoke.

The ventilation in the room may be insufficient when the hood for electric hob

is used simultaneously with devices operating on gas or other fuels (this may not apply to appliances that only discharge the air back into the room).

Objects placed on the product may fall. Do not place any objects on the product.

Do not flambé under your product.

WARNING: Before installing the Hood, remove the protective films.

Never leave high naked flames under the hood when it is in operation.

Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.

1.2 Compliance with the WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling

1 Important safety and environmental instructions

of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

1.3 Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.4 Package Information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dis-

pose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

2 General appearance

2.1 Overview

Control and parts

1. Body
2. Control panel
3. Lighting
4. Grease filter

2.2 Technical data

Model HNS 61222 NAW HNS 61	222 NAX
Supply voltage & frequency 220-2	40V~50/60 Hz
Lamp power 2 W
Motor power 60 W
Air flow - 3. Level 201 m3/h
Insulation class CLASS I
Color White Inox

3 Using the appliance

3.1 Controlling the appliance

A: OFF button Turn off the fan.
B : 1st speed level button	By pressing this button, you enable the device to operate at speed level 1.
C : 2nd speed level button	By pressing this button, you enable the device to operate at the 2nd speed level.
D : 3rd speed level button	By pressing this button, you enable the device to operate at the 3rd speed level.
E : Light on/off You can illuminate the cooking area by pressing this button. Press this button again to turn off the lighting.

3.2 Energy efficient usage

- When operating the hood, adjust the speed level according to the odour and vapour intensity in order to prevent unnecessary power consumption.

- Use low speeds in normal conditions (1–2), and high speed (3) when smell and vapours are intensified.

- Lamps on the hood are intended for illuminating the cooking zone.

- Using them to illuminate the ambient/kitchen will result in unnecessary power consumption and inadequate illumination.

- For your device to consume less energy, run it at a low speed level.

- Your device will reduce energy consumption as it will run more efficiently when you provide sufficient air intake to it.

- Set your device to the intense suction power level before the formation of steam, in cases where you know that the dense steam will occur. So, you reduce energy consumption by using your device for a shorter time as it will have a sufficient air intake.

- Keep the lids of the cookware closed to reduce the steam evolving.

3.3 Operating the hood

- Your appliance contains a motor that has various speeds.

- For better performance, we recommend using low speeds under normal conditions and high speeds in cases of strong odours and intense vapour.

- You can start your appliance by pressing on the desired speed setting button. (b, c, d)

- You may illuminate the cooking area by pressing the lamp.(e)

3.4 Replacement of lamp

- Before replacing the light bulbs, disconnect the power supply of the hood.

- Do not touch the light bulbs when they are hot.

- Be careful not to touch the replaced light bulb directly with hands.

You may procure lamps from Authorised Service Agents.

Disconnect the hood from the main supply. This appliance is equipped with a 2 W LED lamp. Remove the grease filter to access the lamp area. Replace the damaged lamp.

3 Using the appliance

Bulb
Bulb Power 2 W
Holder / Socket L14
Bulb Voltage 110 - 2	40 V
Size 34,5x120 mm
Luminous flux 81 lm
Correlated colour temperature	4050 K

This product contains a light source of energy efficiency class "A".

3.5 Operation with chimney connection

acted through the

flue duct, which is fastened to the connection head on the hood.

•The diameter of the flue duct

must be the same as the connection ring. In horizontal settings, the pipe has to have a slight upward slope (around 10° ) so that the air can exit the room easily.

3.6 Operation without chimney connection

rough the carbon

filter and recirculated in the room. Carbon filter is used when it is impossible to use a flue in the house.

• In flue less use, remove the flaps inside the flue adapter.
• Remove the aluminium grease filter. To install the carbon filter, fit the filter to the tabs by cent-ring it on the plastic piece on both sides of the fan body. Tighten it by turning right or left. -Replace aluminium grease filter.

4 Cleaning and maintenance

The device should be cleaned and maintained regularly. Failure to keep the device clean will adversely affect the service life of the device. For cleaning and maintenance, follow the instructions stated in the manual.

Before cleaning and maintenance, unplug the product or turn off the switch.

Non-compliance with the provisions associated with the cleaning of the device and replacement of the filters may result in a risk of fire. Therefore, it is recommended to follow the guidelines stated here. The manufacturer is not responsible for the engine damages or fires originating from the improper use.

Clean the hood using a damp cloth and a neutral liquid detergent. Do not use abrasive products or alcohol.

4.1 Cleaning of grease filter

The grease filter must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolor slightly, but this does not affect its filtering capacity.

- Push the aluminium grease filter lock forward.

- Then pull it slightly down and pull it out. Otherwise, you can bend the filter. Wash and rinse

aluminium oil filters with liquid detergent and replace aluminium oil filters to their sockets by by carrying out the steps specified above in reverse order. This filter retains the oil particles in the air.

You may wash your grease filters in the dishwasher.

CAUTION: In case of normal use, clean your grease filter once in a month.

4.2 Changing of carbon filter

Odour removing filters contain charcoal (Active carbon). Grease filters must be installed in the product, regardless of whether or not carbon filters are used.

• Remove the grease filter.
• To remove the carbon filter, remove the carbon filter from its housing by rotating it counterclockwise from the tab. • Install the new carbon filter. • Install the grease filter.

CAUTION:

• Carbon filter shall never be washed. Replace carbon filters once every 3 months.
• You can obtain the carbon filter from the authorized services.

5 Installation of appliance

WARNING: Before starting the installation, read the safety information in the User Manual.

WARNING: Failure to install with screws and stabilizers in accordance with these instructions may result in electric shock.

For the installation of the hood, please contact the nearest Authorized Service.

It is the customer's responsibility to prepare the location and electrical installation of the hood.

5.1 Position of the appliance

• Distance between the cooker and the cooker hood must be considered prior to assembly. This distance should be 65 cm.
• Distance must be measured from the surface of the grate for gas cookers, from the surface of glass for electric cookers.

5.2 Installation accessories

1. Hood
2. User manual
3. 4x30 mm wall hanging screw
4. Plastic dowel, 8 x 35 mm
5. Plastic chimney adapter, 150/120 mm
6. Chimney valve

The information required to make the location suitable for the installation of the hood is given below.

5.3 Mounting

CAUTION: Before drilling, ensure that there are no power, gas or water pipes in the close proximity of the drilling locations.

• Take off protection film before installation. • There are 2 methods for ventilation, including horizontal ventilation and vertical ventilation. Please pay attention to the ventilation method when installation.

Two methods of ventilation (A & B).

Vertical ventilation:

Method A: Connect the 120mm air outlet to the top vent of slim hood.

Method B: Cover the top vent of slim hood with outlet cover provided and remove the back square metal plate with tool.

5 Installation of appliance

Air ventilation setting:

Outdoor exhausting: Turn the adjuster to outdoor position, install the outlet, turn on the cooker hood, then the air will be vented from the outside outlet.

Recycling: The recycling mode with carbon filter, Turn the adjuster to indoor position, install the outlet cover, turn on the cooker hood, then the air can be vented from the inside outlet.

For installation:

1. According to the center distance of the holes in the back of the slim hood, measure the position and then drill 2 holes of 8mm diameter on the wall. Insert the plastic wall anchors into each hole and tighten 2 screws (ST4×30) into the plastic wall anchors. Place the slim hood onto the tightened screws. Fix the cooker hood with safety screws. The two safety screw vents are positioned on the back casing, with a diameter of 6mm. Put the one-way valve onto the hood to finish installation.

1. Measure the position and drill 4 holes of 6mm diameter into the bottom of the cabinet and cut the vent hole in the cabinet. Align the slim hood to the hole in the bottom of the cabinet and screw in with 4 screws (ST4×30) as shown in the picture.

5 Installation of appliance

The extensible pipe is an optional accessory, not supplied.

5.4 Air outlet installation method

Installation method for 150mm diameter pipe: Insert the one-way valve as shown in the picture and fix the pipe.

Attention: The bump of the one-way valve must be upward.

Installation method for 120mm diameter pipe: Insert the damper as shown in the picture and fix the converter before placing the duct.

The pipe near the air outlet needs to be fully extended.

5.5 Storage

• If you do not intend to use the appliance for a long time, please store it carefully.
• Please make sure that the appliance is unplugged, cooled down, and totally dry.
• Store the appliance in a cool and dry place.
• Keep the appliance out of the reach of children.

5.6 Handling and transportation

• During handling and transportation, carry the appliance in its original packaging. The packaging of the appliance protects it against physical damages.
• Do not place heavy loads on the appliance or the packaging. The appliance may be damaged.
• Dropping the appliance will render it non-operational or cause permanent damage.

6 Troubleshooting

Troubleshooting Reason Help
The product does not work. Check your fuse. Your fuse might be closed, make it work.
The product does not work. Check the electrical connection.		The mains voltage should be between 220-240 V.
The product does not work. Check the electrical connection.		Check if the other products in your kitchen are working or not.
The lighting lamp does not work.	Check the electrical connection.	The mains voltage should be between 220-240 V.
The lighting lamp does not work.	Check the lamp switch. The lamp switch should be in the “on” position.
The lighting lamp does not work.	Check the lamps. The lamps of the product should not be faulty.
The air intake of the product is poor.	Check the aluminum filter. The aluminum oil filter should be cleaned at least once a month under normal conditions.
The air intake of the product is poor.	Check the air vent flue. The air vent flue should be in the “on” position.
The air intake of the product is poor.	Check the carbon filter. For products with carbon filters, the filter should normally be changed every 3 months.

For installation:

old new

For installation:

For installation:

old new

For installation:

Push the grease filter lock forward.

Then gently pull it downwards and out. Otherwise, you may bend the filter. Wash and rinse the grease filter with liquid detergent and return the grease filter to its place following the steps above in reverse order. These grease filters are used to trap oil particles in the air.

For installation:

For mounting:

5

Mounting the device