AWK-3131A-US - Access Point Moxa - Free user manual and instructions
Find the device manual for free AWK-3131A-US Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Wireless Access Point |
| Model | AWK-3131A-US |
| Brand | Moxa |
| Dimensions (W x D x H) | 145 x 105 x 38 mm |
| Weight | 0.5 kg |
| Power Supply | 12 to 48 VDC (terminal block) or PoE (802.3af) |
| Power Consumption | 12 W max |
| Wireless Standards | IEEE 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 300 Mbps (2x2 MIMO) |
| Antenna Connector | 2 x RP-SMA (female) |
| Ethernet Ports | 2 x 10/100BaseT(X) (RJ45) |
| Operating Modes | AP, Client, Bridge, Router, Repeater |
| Security | WEP, WPA/WPA2 Personal & Enterprise, IEEE 802.1X |
| Mounting | DIN-rail or wall mount |
| Ingress Protection | IP30 |
| Operating Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5–95% non-condensing |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Safety Certifications | UL 62368-1, CSA, FCC, CE |
| Spare Parts / Repairability | Replacement antennas, power supply; consult Moxa for repairs |
| General Information | Industrial-grade, rugged design for harsh environments |
Frequently Asked Questions - AWK-3131A-US Moxa
How do I reset the AWK-3131A-US to factory defaults?
Press and hold the Reset button on the side of the device for at least 5 seconds until the LEDs flash. The access point will reboot with default settings.
Can I power the AWK-3131A-US via PoE?
Yes, the device supports 802.3af PoE on port 1. Alternatively, you can use a 12 to 48 VDC power supply connected to the terminal block.
How do I access the web interface of the access point?
Connect your computer to the same network as the access point. Open a browser and enter the default IP address 192.168.127.253. The default username is admin with password moxa.
What wireless security options are available?
The AWK-3131A-US supports WEP, WPA/WPA2 Personal, and WPA/WPA2 Enterprise with IEEE 802.1X authentication.
How can I extend the Wi-Fi range using this access point?
You can configure the device as a repeater or bridge to extend wireless coverage. Ensure the device has a clear line of sight to the main AP for best performance.
What is the maximum number of connected clients?
The recommended maximum number of concurrent wireless clients is 32 per radio for optimal performance.
Does the AWK-3131A-US support dual-band operation?
Yes, it supports both 2.4 GHz and 5 GHz bands simultaneously, allowing for better throughput and reduced interference.
How do I update the firmware?
Download the latest firmware from the Moxa support website. Log in to the web interface, go to System Management > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What should I do if the access point is not powering on?
Check the power supply connection and verify that the voltage is within the 12–48 VDC range. If using PoE, ensure the injector/switch supports 802.3af. Test with a known working power source.
Can I mount the AWK-3131A-US on a DIN rail?
Yes, the device comes with a DIN-rail mounting kit. You can also wall-mount it using the provided brackets.
User questions about AWK-3131A-US Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AWK-3131A-US - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWK-3131A-US by Moxa.
USER MANUAL AWK-3131A-US Moxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moxa
Model : AWK-3131A-US
Category : Access Point