Moxa

AWK-1137C-US - Access Point Moxa - Free user manual and instructions

Find the device manual for free AWK-1137C-US Moxa in PDF.

📄 7 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Moxa AWK-1137C-US - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Industrial Wireless Access Point
Model AWK-1137C-US
Brand Moxa
Wireless Standards IEEE 802.11a/b/g/n
Frequency Band 2.4 GHz and 5 GHz
Maximum Data Rate Up to 300 Mbps
Antenna Connectors 2 x RP-SMA (external antenna)
Ethernet Ports 1 x 10/100/1000BaseT(X) (RJ45)
Power Input 12 to 48 VDC (terminal block) or PoE (802.3af/at)
Power Consumption Typ. 12 W
Dimensions (W x H x D) 40 x 115 x 80 mm (1.57 x 4.53 x 3.15 in)
Weight Approx. 250 g (0.55 lb)
Operating Temperature -40°C to 75°C (-40°F to 167°F)
Humidity 5% to 95% (non-condensing)
Protection Class IP30
Mounting DIN-rail, wall, or pole (kit included)
Wireless Security WEP, WPA/WPA2-PSK, IEEE 802.1X, ACL
Management Web GUI, Telnet, SNMP v1/v2c/v3
Key Features Dual-band, rugged design, PoE support, industrial temperature range
Maintenance Clean with dry cloth; no internal user-serviceable parts
Spare Parts / Repairability Contact Moxa support for replacement units or repair

Frequently Asked Questions - AWK-1137C-US Moxa

How do I reset the Moxa AWK-1137C-US to factory defaults?
Press and hold the reset button on the device for 5 seconds while power is on. The device will reboot with factory settings. Alternatively, use the web interface: go to System > Factory Default.
What is the default IP address and login credentials?
The default IP address is 192.168.127.253. Default username is admin and password is Moxa (case-sensitive). Ensure your PC is on the same subnet to access.
Can the AWK-1137C-US be powered via PoE?
Yes, it supports IEEE 802.3af/at PoE (Power over Ethernet). Connect a PoE switch or injector to the Ethernet port. It also accepts 12-48 VDC via the terminal block.
What wireless modes does this access point support?
It supports Access Point, Client (station), WDS, and Repeater modes. Mode can be selected via web management under Wireless Settings.
How do I configure the AWK-1137C-US for the first time?
Connect the device to your network via Ethernet, assign an IP address (or use default), open a web browser and enter the IP. Log in with admin/Moxa. Run the Setup Wizard to configure SSID, security, and network parameters.
What security protocols are available?
The device supports WEP (64/128-bit), WPA/WPA2-PSK, WPA/WPA2-Enterprise (802.1X with RADIUS), and MAC address filtering (ACL). It is recommended to use WPA2-PSK with AES for robust security.
How can I update the firmware?
Download the latest firmware from Moxa's website. Access the web GUI, go to System > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
What is the maximum range of the AWK-1137C-US?
Range depends on environment and antenna. With the supplied 2 dBi antennas, typical outdoor range is up to 100 meters (328 ft) and indoor up to 30 meters (98 ft). Using higher gain antennas can extend range.
Can I mount the device outdoors?
The AWK-1137C-US has an IP30 rating, meaning it is protected against dust but not water. It should be installed in an enclosure or protected location for outdoor use. It can operate in temperatures from -40°C to 75°C.
How do I troubleshoot connectivity issues?
Check the power LED; if off, verify power supply. Ensure Ethernet cable is securely connected. Use the ping command from a PC to test IP reachability. Verify if the wireless client is within range and using correct SSID/security settings. You can also view system logs via Monitoring > System Log in the web interface.

User questions about AWK-1137C-US Moxa

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Access Point in PDF format for free! Find your manual AWK-1137C-US - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWK-1137C-US by Moxa.

USER MANUAL AWK-1137C-US Moxa

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Moxa

Model : AWK-1137C-US

Category : Access Point