AWK-1131A - Access Point Moxa - Free user manual and instructions
Find the device manual for free AWK-1131A Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Wireless Access Point |
| Model | AWK-1131A |
| Brand | Moxa |
| Dimensions (W x H x D) | 105 x 115 x 60 mm |
| Weight | Approx. 400 g |
| Power Input | 12 to 48 VDC via terminal block or PoE (802.3af) |
| Frequency Bands | 2.4 GHz and 5 GHz (dual-band) |
| Wireless Standards | IEEE 802.11a/b/g/n |
| Maximum Data Rate | 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz) |
| Security Protocols | WPA2 Personal/Enterprise, 802.1X, RADIUS |
| Ethernet Port | 1 x 10/100/1000 Base-T(X) (RJ45) |
| Mounting Type | DIN-rail or wall-mount with optional kit |
| Operating Temperature | -40 to 75°C |
| Ingress Protection | IP30 |
| Antenna Connector | 2 x RP-SMA (external antenna included) |
| Management | Web GUI, SNMP v1/v2c/v3, CLI |
| Certifications | CE, FCC, UL, CCC |
| Maintenance | Keep vents clean; avoid exposure to moisture; use a dry cloth for cleaning |
| Repair and Spare Parts | Contact Moxa support for service; no user-serviceable parts inside |
Frequently Asked Questions - AWK-1131A Moxa
How do I reset the AWK-1131A to factory defaults?
Press and hold the Reset button for at least 5 seconds while the device is powered on. The device will reboot with factory settings. Alternatively, you can reset via the web interface under System Management > Factory Default.
What is the default IP address of the AWK-1131A?
The default IP address is 192.168.127.253, with subnet mask 255.255.255.0. The default username is admin and password is moxa (case-sensitive).
Can the AWK-1131A be used outdoors?
Yes, but it requires a weatherproof enclosure for outdoor use. The device itself has an IP30 rating, which is not water-resistant. For outdoor installation, place it in a suitable NEMA box to protect from rain and dust.
Does the AWK-1131A support Power over Ethernet (PoE)?
Yes, it complies with IEEE 802.3af PoE. You can power the device through the Ethernet port using a PoE switch or injector. It also supports DC power via terminal block (12-48 VDC).
How do I configure the wireless settings?
Access the web GUI via the default IP, go to Wireless Settings. You can set SSID, encryption (e.g., WPA2-PSK), channel, and band (2.4 GHz or 5 GHz). Apply changes and reboot if necessary.
What is the maximum range of the AWK-1131A?
Indoor range is typically up to 100 meters, and outdoor up to 300 meters depending on obstacles and antenna. For extended range, use high-gain external antennas with RP-SMA connectors.
How can I update the firmware?
Download the latest firmware from Moxa's website. Go to the web GUI, navigate to System Management > Firmware Upgrade, upload the file, and wait for the device to reboot. Do not power off during the process.
What security modes are supported?
The device supports WPA2 Personal (pre-shared key), WPA2 Enterprise (with RADIUS server), 802.1X authentication, and MAC address filtering. It also supports WEP (not recommended).
Is the AWK-1131A compatible with 802.11ac devices?
It is not compatible with 802.11ac because it only supports up to 802.11n. However, it can work with 802.11a/b/g/n clients. For 802.11ac, consider a newer model like the AWK-3131A.
How do I troubleshoot connectivity issues?
Check the LED indicators: Power LED should be solid, WLAN LED blinks during activity. Verify IP settings (use ping). Check antenna connections and try a different channel. Access the log via the web GUI under System Monitoring.
User questions about AWK-1131A Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AWK-1131A - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWK-1131A by Moxa.