VX-760C - Flash Bolt - Free user manual and instructions
Find the device manual for free VX-760C Bolt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Camera Flash |
| Brand | Bolt |
| Model | VX-760C |
| Guide Number (ISO 100, 105mm) | 60 meters |
| Zoom Head Range | 24-105mm |
| TTL Compatibility | Canon, Nikon, Sony, Fuji, Olympus/Panasonic |
| Wireless Modes | Master, Slave, S1/S2 Optical Slave |
| Recycle Time | 0.1-5 seconds (depending on power level) |
| Flash Duration | 1/200 to 1/20000 sec |
| Power Source | 4 x AA batteries (alkaline, NiMH, or lithium) |
| Number of Flashes (AA alkaline) | Approx. 200 at full power |
| Dimensions (approx.) | 7.6 x 13.5 x 9.5 cm |
| Weight (without batteries) | Approx. 400 g |
| Swivel/Tilt Head | Up 90°, Down 7°, Left 180°, Right 180° |
| Built-in Flash Trigger | Yes, hot shoe with PC sync port |
| Maintenance | Clean with soft dry cloth; avoid moisture and extreme temperatures |
| Safety | Do not disassemble; keep away from flammable objects; use recommended batteries only |
| Spare Parts / Repairability | Batteries and sync cables user-replaceable; other repairs require authorized service |
| General Information | Designed for on- and off-camera flash photography, supports high-speed sync and stroboscopic mode |
Frequently Asked Questions - VX-760C Bolt
How do I attach the flash to my camera?
Slide the flash’s hot shoe onto your camera’s hot shoe mount and lock it by turning the locking wheel or lever. Ensure it is securely fastened.
What batteries does the VX-760C use?
It uses 4 AA batteries. For best performance, use NiMH rechargeable or lithium batteries.
How do I use TTL mode?
Set the flash to TTL mode using the mode button. Ensure your camera is TTL-compatible (Canon, Nikon, Sony, etc.). The flash will automatically adjust power based on metering.
Can I use this flash wirelessly?
Yes, it supports optical slave modes (S1 and S2) and can act as a master or slave in a wireless system. Refer to the manual for specific triggering setups.
How do I zoom the flash head?
Press the Zoom button to cycle through focal lengths (24-105mm). The head will adjust automatically in TTL mode based on lens focal length if compatible.
What is the maximum guide number?
The maximum guide number is 60 meters at ISO 100 and 105mm zoom head position.
How do I clean the flash?
Use a soft, dry cloth to wipe the exterior. Avoid liquids or abrasive materials. Keep the flash head clean for optimal light output.
Is there a high-speed sync (HSS) mode?
Yes, the VX-760C supports high-speed sync (FP flash) when used with compatible cameras. Enable HSS on both camera and flash.
What does the stroboscopic mode do?
Stroboscopic mode fires multiple flashes in quick succession, useful for capturing multiple exposures or motion studies. Set number of flashes and frequency via the control dial.
How can I reset the flash to factory settings?
Press and hold the Mode and Zoom buttons simultaneously for 3 seconds until the display resets. This clears custom settings.
User questions about VX-760C Bolt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flash in PDF format for free! Find your manual VX-760C - Bolt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VX-760C by Bolt.
USER MANUAL VX-760C Bolt
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bolt
Model : VX-760C
Category : Flash