VM-160-V2 - Flash Bolt - Free user manual and instructions
Find the device manual for free VM-160-V2 Bolt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Camera Flash (Speedlight) |
| Brand | Bolt |
| Model | VM-160-V2 |
| Dimensions | 190 x 75 x 55 mm |
| Weight | 320 g (with batteries) |
| Power Source | 4 x AA batteries (Alkaline or Ni-MH) |
| Guide Number (ISO 100, 105mm) | 38 (meters) |
| Zoom Range | 24 – 105 mm (automatic or manual) |
| Recycling Time | 0.3 – 4 seconds (depending on power and batteries) |
| Flash Modes | TTL, Manual, Multi, Stroboscopic |
| Color Temperature | 5600 K (approx.) |
| Power Control | 1/1 to 1/128 in 1/3 stops |
| Synchronization | Hot shoe, PC sync, optical slave, radio (optional) |
| High-Speed Sync (HSS) | Yes (with compatible cameras) |
| Wireless Triggering | Optical slave, built-in radio receiver (2.4 GHz) |
| Bounce/Swivel Head | Yes, 90° up, 180° left/right |
| Modeling Light | Yes, LED (approx. 10W) |
| Display | Backlit LCD panel |
| Firmware Update | Via USB (using Bolt software) |
| Included Accessories | Stand, carrying case, sync cable, diffuser |
Frequently Asked Questions - VM-160-V2 Bolt
How do I attach the Bolt VM-160-V2 to my camera?
Slide the flash foot into the camera's hot shoe until it locks. Secure by tightening the locking ring on the foot. For off-camera use, use a compatible sync cable or wireless trigger.
What batteries does the VM-160-V2 use?
It uses four AA batteries. For faster recycling and longer life, use Ni-MH rechargeable batteries. Alkaline batteries are also compatible.
How do I perform a factory reset on the flash?
Press and hold the Mode and Set buttons simultaneously for 3 seconds. The LCD will show 'Reset' and the flash will revert to default settings.
Can I use this flash with any camera?
The VM-160-V2 works with cameras that have a standard hot shoe with single-pin synchronization. For TTL functions, it must be compatible with your camera's specific TTL system (e.g., Canon, Nikon). Refer to the compatibility list in the manual.
How do I clean the flash unit?
Use a soft, dry cloth to wipe the exterior. Avoid liquid cleaners. Clean the flash tube and reflector gently with a lens cleaning cloth to maintain performance.
What is the maximum flash range with the VM-160-V2?
The maximum range depends on the guide number and aperture. At ISO 100 and 105mm zoom, the guide number is 38m (125 ft). For example, at f/8, the working distance is about 4.75m (15.6 ft).
Why is the flash not firing?
Check that the batteries are inserted correctly and have sufficient charge. Ensure the flash is properly attached to the camera or triggered wirelessly. Verify that the flash is in a mode that allows firing (e.g., not in sleep mode).
How do I update the firmware?
Download the latest firmware from the Bolt website. Connect the flash to your computer via USB. Run the Bolt firmware updater software and follow on-screen instructions. Do not disconnect during update.
What is the recycling time?
Recycling time varies from 0.3 seconds at 1/128 power to about 4 seconds at full power, depending on battery type and condition. Ni-MH batteries provide faster recycling than alkalines.
Can I use the flash as a wireless master?
Yes, the VM-160-V2 can act as a master or slave in a wireless system. Use the built-in 2.4GHz radio to control groups and channels for multi-flash setups.
User questions about VM-160-V2 Bolt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flash in PDF format for free! Find your manual VM-160-V2 - Bolt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM-160-V2 by Bolt.
USER MANUAL VM-160-V2 Bolt
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bolt
Model : VM-160-V2
Category : Flash