AKKU IP Flat Light 1 - Projector Eurolite - Free user manual and instructions
Find the device manual for free AKKU IP Flat Light 1 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery-powered LED flat light |
| Model | AKKU IP Flat Light 1 |
| Brand | Eurolite |
| Light Source | LED, 1 x 30W RGBAWUV 6-in-1 |
| Beam Angle | 60° |
| IP Rating | IP65 (dust-tight, protected against water jets) |
| Battery | Rechargeable Li-Ion, 14.8V / 5200mAh |
| Battery Runtime | Up to 20 hours (single color) / 8 hours (RGB) |
| Charging Time | Approx. 6 hours |
| Power Supply | 100-240V AC, 50/60Hz via included power adapter |
| Power Consumption | 40W |
| DMX Channels | 6 / 10 / 14 / 18 selectable |
| Control | DMX512, master/slave, sound-to-light, stand-alone, IR remote (optional) |
| Display | OLED display with touch buttons |
| Dimensions (WxHxD) | 280 x 240 x 120 mm |
| Weight | 3.2 kg |
| Housing | Aluminum, black, with adjustable bracket |
| Mounting | Floor placement or hanging bracket, M10 rigging point |
| Cooling | Passive convection |
| Accessories Included | Power adapter, bracket, mounting screws, manual |
Frequently Asked Questions - AKKU IP Flat Light 1 Eurolite
What is the battery life of the AKKU IP Flat Light 1?
The battery life depends on usage. In single-color mode, it can last up to 20 hours. In full RGB mode, expect around 8 hours. Actual runtime may vary with brightness and color mixing.
How do I charge the fixture?
Connect the included power adapter to the DC input on the back of the fixture. The battery charges automatically. A full charge takes approximately 6 hours. The OLED display shows charging status.
Is the fixture waterproof?
The AKKU IP Flat Light 1 has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets. It is suitable for outdoor use but should not be submerged.
Can I control the light via DMX?
Yes, it supports DMX512 protocol. You can select between 6, 10, 14, or 18 DMX channels depending on the desired control mode. Use standard 3-pin XLR cables to connect to a DMX controller.
What is the maximum brightness?
The fixture features a 30W 6-in-1 LED (RGBAWUV) with a maximum output of approximately 2000 lux at 1 meter. The beam angle is 60°.
How do I mount the fixture?
The fixture includes an adjustable bracket that can be used for floor placement or hanging. It also has an M10 rigging point for overhead mounting. Ensure the mount can support at least 3.2 kg.
Does it come with a remote control?
An infrared remote control is not included by default but is available as an optional accessory. The fixture can be controlled via DMX, master/slave, sound activation, or standalone modes.
Can I replace the battery?
The battery is built-in and not user-replaceable. If the battery no longer holds a charge, contact Eurolite service or an authorized technician for replacement.
What colors are available with the RGBAWUV LED?
The LED combines Red, Green, Blue, Amber, White, and UV (ultraviolet) diodes, allowing a wide range of color mixing. You can create pastel shades, vivid colors, and UV effects.
How do I clean the fixture?
Use a soft, dry cloth to clean the housing. For the lens, use a lens cleaning solution and microfiber cloth. Avoid using abrasive cleaners or liquids that could enter the fixture. Ensure the fixture is turned off and disconnected from power before cleaning.
User questions about AKKU IP Flat Light 1 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual AKKU IP Flat Light 1 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AKKU IP Flat Light 1 by Eurolite.