LED IP FL-30 - Projector Eurolite - Free user manual and instructions
Find the device manual for free LED IP FL-30 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Projector (Wash Light) |
| Model | LED IP FL-30 |
| Brand | Eurolite |
| LED Type | 30W RGBW (est.) |
| Beam Angle | 15° - 30° (adjustable) |
| IP Rating | IP65 (weatherproof) |
| DMX Channels | 4/8 channels (selectable) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 35W max |
| Dimensions (W x H x D) | 200 x 250 x 180 mm (est.) |
| Weight | 2.5 kg (est.) |
| Housing Material | Aluminum die-cast |
| Cooling | Passive convection |
| Mounting | Bracket with locking knob |
| Operating Modes | DMX, Master/Slave, Standalone |
| Control Interface | 3-pin XLR in/out |
| Display | LED digital display |
| Maintenance | Clean lens with soft cloth; check cables |
| Safety Features | Overheat protection; safety cable attachment |
| Spare Parts | LED modules, power supply, XLR connectors |
| Warranty | 2 years (manufacturer) |
| Manual Languages | EN, DE (PDF) |
Frequently Asked Questions - LED IP FL-30 Eurolite
How do I connect the LED IP FL-30 to a DMX controller?
Use a standard 3-pin DMX cable to connect the DMX IN port of the fixture to the controller's output. Set the DMX address via the control panel. Ensure the fixture is in DMX mode.
What is the IP rating of this projector?
The Eurolite LED IP FL-30 has an IP65 rating, meaning it is dust-tight and protected against water jets. Suitable for outdoor use.
Can I use multiple units together without a DMX controller?
Yes, you can use Master/Slave mode. Connect units via DMX cables, set one as master and the others as slave. They will sync to the master's program.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild lens cleaner. Do not use abrasive materials. Ensure the fixture is unplugged and cooled down.
What is the expected lifespan of the LED?
The LEDs are rated for approximately 50,000 hours of operation. Actual life depends on usage conditions like temperature and ventilation.
Does the fixture support RDM (Remote Device Management)?
No, the LED IP FL-30 does not support RDM. It uses standard DMX-512 protocol for control.
What power cable does it use?
It comes with a PowerCon compatible power cord (or standard IEC). Always use a grounded outlet. Check voltage compatibility (100-240V).
Can I mount the projector on a truss?
Yes, use the included bracket to clamp onto a truss or pipe. Secure with a safety cable (not included) for overhead installation.
How do I reset the DMX address?
Press the Menu button to enter settings, navigate to DMX Address, use the arrow keys to set a new address, and press Enter to confirm.
Is the fan noise loud?
The LED IP FL-30 uses passive cooling, so it is virtually silent. No fan noise.
User questions about LED IP FL-30 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual LED IP FL-30 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED IP FL-30 by Eurolite.
USER MANUAL LED IP FL-30 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED IP FL-30
Category : Projector