VR-120 - Receiver Block - Free user manual and instructions
Find the device manual for free VR-120 Block in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Block |
| Model | VR-120 |
| Dimensions (W x H x D) | 430 x 150 x 330 mm |
| Weight | 8.5 kg |
| Power Output (8 ohms, stereo) | 100 W per channel |
| Supported Audio Formats | Dolby Digital, DTS, PCM |
| HDMI Inputs | 4 |
| HDMI Output (ARC) | 1 |
| Analog Audio Inputs | 3 (including phono) |
| Digital Audio Inputs | 1 coaxial, 1 optical |
| Subwoofer Pre-Outs | 2 |
| Video Features | 4K pass-through, HDR10, Dolby Vision |
| Wireless Connectivity | Bluetooth, Wi-Fi, Ethernet |
| Radio Tuner | FM/AM with presets |
| Power Supply | AC 220-240V, 50/60 Hz |
| Power Consumption | 350 W (standby <0.5 W) |
| Frequency Response | 20 Hz – 20 kHz |
| Impedance | 8 ohms |
| Signal-to-Noise Ratio | 100 dB |
| Total Harmonic Distortion | <0.05% |
| Auto Calibration | Yes (with included microphone) |
| Multi-Room Support | Zone 2 output |
| Accessories Included | Remote control, batteries, FM/AM antennas, calibration microphone |
| Warranty | 2 years |
Frequently Asked Questions - VR-120 Block
How do I connect my TV to the Block VR-120 receiver?
Use an HDMI cable from your TV's HDMI ARC port to the receiver's HDMI output (ARC). Ensure both devices have ARC enabled in their settings.
Can I use the VR-120 with Bluetooth headphones?
The VR-120 supports Bluetooth audio output, but typically for speakers, not headphones. Check if your headphones have a transmitter or use a Bluetooth adapter connected to the headphone jack.
What speaker impedance is recommended?
The receiver is rated for 8 ohm speakers. Using 4 ohm speakers may cause overheating; consult the manual for compatibility.
How do I perform the auto calibration?
Connect the included calibration microphone to the front panel jack, place it at ear level, then navigate to the setup menu and select 'Auto Calibration'. Follow the on-screen instructions.
Why is there no sound from my speakers?
Check that the correct input is selected, speaker wires are securely connected, and the volume is not muted. Also verify that the speaker settings are configured properly in the menu.
Can I control the receiver with my smartphone?
Yes, download the Block Remote app (available for iOS and Android) and connect via Wi-Fi or Bluetooth to control basic functions.
Does the VR-120 support Dolby Atmos?
Yes, the receiver supports Dolby Atmos with height channels (5.1.2 configuration). Ensure your speakers are placed accordingly and the source material includes Atmos.
How do I reset the receiver to factory defaults?
Press and hold the 'Setup' button on the front panel for 5 seconds until 'Factory Reset' appears on the display. Confirm by pressing 'Enter'.
What is the maximum power consumption?
The maximum power consumption is 350 W under normal use. Standby consumption is less than 0.5 W.
Can I connect a turntable without a preamp?
Yes, the VR-120 has a built-in phono preamp. Connect your turntable to the 'PHONO' input and ensure the ground wire is attached if needed.
User questions about VR-120 Block
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual VR-120 - Block and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VR-120 by Block.
USER MANUAL VR-120 Block
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Block
Model : VR-120
Category : Receiver