Atem SDI - Controller Blackmagic Design - Free user manual and instructions
Find the device manual for free Atem SDI Blackmagic Design in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Switcher Controller |
| Brand | Blackmagic Design |
| Model | ATEM SDI |
| Dimensions (W x H x D) | 210 x 117 x 42 mm |
| Weight | 0.7 kg |
| Power Supply | 12V DC, 1A |
| Power Consumption | 12W |
| Input Connectors | 4 x 3G-SDI, 1 x HDMI (aux) |
| Output Connectors | 2 x 3G-SDI, 1 x HDMI |
| Audio Input | 2 x XLR (analog), 1 x 3.5mm TRS |
| Audio Output | 1 x 3.5mm TRS headphone, 1 x 3.5mm line |
| Control Interface | Buttons, T-bar, rotary knobs |
| Supported Video Formats | 1080p up to 60 fps, 720p, NTSC/PAL |
| Built-in Display | 2.2-inch LCD |
| Compatible Software | ATEM Software Control (free) |
| Mounting | Desktop or 1/4-20 tripod mount |
| Cleaning Instructions | Wipe with a soft dry cloth. Do not use liquids or solvents. |
| Safety Precautions | Keep away from moisture and extreme temperatures. Use only provided power adapter. |
| Spare Parts & Repairability | Contact Blackmagic Design support for service. No user-serviceable parts inside. |
| General Information | Professional live production switcher for broadcast and event videography. |
Frequently Asked Questions - Atem SDI Blackmagic Design
How do I connect the ATEM SDI to my camera?
Use a standard SDI cable to connect your camera's SDI output to one of the SDI Input ports on the switcher. Ensure the camera outputs a compatible video format (e.g., 1080p).
Can I record directly from the ATEM SDI?
No, the ATEM SDI does not have built-in recording. Use the Program Output (SDI or HDMI) to connect to an external recorder or capture device.
How do I update the firmware?
Download the latest firmware from Blackmagic Design's website. Connect the switcher to your computer via USB, run the installer, and follow on-screen instructions. Do not disconnect power during update.
What video resolutions are supported?
The ATEM SDI supports 1080p up to 60 fps, 1080i, 720p, and standard definition formats like NTSC and PAL. All inputs must be set to the same format.
How do I clean the device?
Use a soft, dry, lint-free cloth to gently wipe the surface. Avoid using any liquids, sprays, or abrasive cleaners that could damage the electronics or finish.
Can I control the switcher with software?
Yes, download the free ATEM Software Control from Blackmagic Design. Connect via USB or Ethernet (if using a network) to access advanced settings and macros.
What audio inputs are available?
The switcher has two XLR analog inputs and a 3.5mm TRS jack. You can embed audio from SDI sources and mix them using the built-in audio mixer.
How do I perform a factory reset?
Press and hold the Setup button on the front panel while powering on the unit. Release the button when the reset screen appears. Confirm to restore defaults.
Is the ATEM SDI rack-mountable?
No, the ATEM SDI is desktop portable. It can be placed on a table or mounted on a tripod using the 1/4-20 thread on the bottom. Optional rack-mount kits are not standard.
What is the maximum cable length for SDI?
For 3G-SDI signals, high-quality cables can run up to 80-100 meters without a booster. Beyond that, use signal repeaters or fiber converters.
User questions about Atem SDI Blackmagic Design
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual Atem SDI - Blackmagic Design and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Atem SDI by Blackmagic Design.
USER MANUAL Atem SDI Blackmagic Design
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blackmagic Design
Model : Atem SDI
Category : Controller