LH-065 - Uncategorized Omnitronic - Free user manual and instructions
Find the device manual for free LH-065 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Lighting Effect |
| Model | LH-065 |
| Brand | Omnitronic |
| Dimensions (L x W x H) | 200 mm x 200 mm x 250 mm |
| Weight | 1.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 30 W |
| Light Source | LED, RGB |
| Beam Angle | 25° |
| Control Modes | DMX512, Sound Active, Master/Slave, Auto |
| DMX Channels | 6/7/10 selectable |
| Number of LEDs | 18 x 1W |
| Housing Material | Aluminum |
| Cooling | Passive (convection) |
| Protection Rating | IP20 |
| Mounting Options | Floor stand, truss clamp (not included) |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Safety | Ensure adequate ventilation; do not open; use only supplied power cord |
| Spare Parts & Repairability | Contact authorized service center for repairs; no user-serviceable parts |
| Included Accessories | Power cord, user manual |
| Certifications | CE, RoHS |
Frequently Asked Questions - LH-065 Omnitronic
How do I set the DMX address on the LH-065?
Use the Menu button to enter the settings, then use Up/Down to select DMX Address. Press Enter to confirm and set the address using the same buttons.
Can the LH-065 be used in sound-active mode?
Yes, select Sound Active mode from the menu. The device will respond to ambient music via the built-in microphone. Adjust sensitivity if needed.
What is the maximum number of units I can chain in master/slave mode?
You can chain up to 32 units in a master/slave configuration. Set the first unit as Master and the others as Slave via the menu.
How do I clean the LH-065?
Disconnect the power supply and use a soft, dry cloth to gently wipe the housing. Do not use liquids or abrasive cleaners.
Is the LH-065 suitable for outdoor use?
No, it has an IP20 rating, meaning it is only suitable for indoor use in dry conditions. Protect it from moisture.
What power cord does the LH-065 use?
It uses a standard IEC C7 (figure-8) power cord. The included cord is specific to your region's plug type.
How do I reset the LH-065 to factory settings?
In the menu, navigate to Factory Reset and press Enter. Confirm the action when prompted.
Can I mount the LH-065 on a truss?
Yes, it has a mounting bracket suitable for truss clamps. Use a clamp (not included) that supports the weight (1.5 kg).
What is the lifespan of the LEDs?
The LEDs have a rated lifespan of approximately 50,000 hours. This may vary based on operating conditions.
The unit does not turn on. What should I check?
First, ensure thepower cord is securely connected and the wall outlet is working. Check the fuse; if blown, replace it with the same type (T1A/250V). If the issue persists, contact support.
User questions about LH-065 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LH-065 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LH-065 by Omnitronic.
USER MANUAL LH-065 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : LH-065
Category : Uncategorized