PKHAP 20-Li C4 - Cordless drill driver PARKSIDE - Free user manual and instructions
Find the device manual for free PKHAP 20-Li C4 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill/driver |
| Brand | Parkside |
| Model | PKHAP 20-Li C4 |
| Power supply | Lithium-ion battery 20 V, 2.0 Ah, charger included |
| Dimensions (L x W x H) | 200 x 200 x 60 mm (approx.) |
| Weight | 1.2 kg (approx., without battery) |
| No-load speed | 0 – 400 / 0 – 1500 rpm (2 speeds) |
| Max torque | 30 Nm (approx.) |
| Chuck | 10 mm keyless chuck |
| Drilling capacity (steel/wood) | 10 mm / 25 mm (approx.) |
| Main functions | Drilling, screwdriving, reversing switch, spindle lock, LED light, torque adjustment (20+1 positions) |
| Maintenance and cleaning | Disconnect the battery before cleaning. Wipe with a dry cloth. Do not use abrasive products. |
| Safety | Double insulation, chuck brake, overload protection, emergency stop (release the switch) |
| Spare parts and repairability | Parts available through Parkside after-sales service. Professional repair recommended. |
| General information | DIY tool, non-professional. Intended use: drilling and screwdriving in wood, metal and plastic. |
Frequently Asked Questions - PKHAP 20-Li C4 PARKSIDE
How do I change the chuck of the Parkside PKHAP 20-Li C4 drill?
To change the chuck, loosen the fixing screw inside the chuck (left-hand thread), then unscrew the chuck from the spindle. Reassemble the new chuck in reverse order. See the manual for details.
What is the battery runtime?
The runtime depends on usage. With a 2.0 Ah battery, it can last about 30 minutes to 1 hour under moderate use. Use a higher capacity battery for extended work.
How do I adjust the torque setting?
Turn the adjustment ring located behind the chuck. The numbered positions indicate torque level. Start with a low setting for screwdriving, then increase for drilling.
Can I use batteries from other brands?
No, use only Parkside 20 V series batteries. The connectors and voltage are specific. Using other batteries may damage the tool or create a safety risk.
How do I clean the drill?
Always disconnect the battery before cleaning. Wipe the exterior with a slightly damp cloth. Never immerse the tool in water and do not use harsh chemicals.
Does the drill have a drilling function?
Yes, select drilling mode by turning the adjustment ring to the drill symbol. For screwdriving, choose a torque setting appropriate for the material.
How do I reverse the rotation direction?
Use the reversing switch located above the trigger. Push it to the left for clockwise rotation (drilling), to the right for counterclockwise rotation (unscrewing). Do not change direction while the motor is running.
What should I do if the chuck jams?
Ensure the tool is off and the battery is removed. Try to loosen the chuck manually or with a chuck key. If the problem persists, contact Parkside after-sales service.
Which accessories are compatible?
Use drill bits and screwdriver bits with a cylindrical shank of max. 10 mm. Accessories with quick-release systems (SDS) are not compatible. Prefer standard screwdriver bits.
How do I store the drill?
Store the tool in a dry, frost-free place. Remove the battery to prevent deep discharge. Use the provided transport case if possible.
User questions about PKHAP 20-Li C4 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cordless drill driver in PDF format for free! Find your manual PKHAP 20-Li C4 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PKHAP 20-Li C4 by PARKSIDE.
USER MANUAL PKHAP 20-Li C4 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PKHAP 20-Li C4
Category : Cordless drill driver