HFG 1K - Measuring equipment PCE Instruments - Free user manual and instructions
Find the device manual for free HFG 1K PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Force Gauge |
| Model | HFG 1K |
| Brand | PCE Instruments |
| Measurement Range | 0 ... 1000 N (1 kN) |
| Resolution | 0.1 N |
| Accuracy | ±0.5% of full scale |
| Display | Backlit LCD, 5-digit |
| Measurement Units | N, kg, lb, oz (selectable) |
| Functions | Peak hold, Tare, Real-time, Set high/low limits |
| Sampling Rate | 1000 Hz |
| Overload Protection | 150% of full scale |
| Power Supply | Rechargeable Li-ion battery, 3.7 V, 2200 mAh |
| Battery Life | Approx. 30 hours continuous use |
| Charging | USB-C cable included |
| Dimensions | 225 x 78 x 36 mm |
| Weight | Approx. 380 g |
| Material | Aluminum alloy housing |
| Connection | USB data output, external load cell connector (optional) |
| Software | PCE Force Gauge Software (free download) |
| Accessories Included | Hook, flat tip, conical tip, charger, USB cable, manual |
| Operating Temperature | 0 ... 40 °C |
| Storage Temperature | -10 ... 60 °C |
| Humidity | ≤80 % RH (non-condensing) |
| Languages | English, German, French, Spanish (menu) |
Frequently Asked Questions - HFG 1K PCE Instruments
How to calibrate the HFG 1K?
To calibrate, press and hold the CAL button until the display shows "CAL". Apply a known force (e.g., a certified weight) and confirm. The gauge will automatically adjust. Refer to the manual for detailed steps.
How to change measurement units?
Press the UNIT button repeatedly to cycle through N, kg, lb, and oz. The selected unit appears on the display.
How to use the peak hold function?
Press PEAK to enable peak hold mode. The gauge will capture and display the maximum force applied. Press PEAK again to reset.
How to perform a tare/zero?
With no load, press the TARE or ZERO button to reset the display to zero. This compensates for any attached fixtures or offsets.
What to do if the gauge shows overload?
If "OVER" or "----" appears, remove the load immediately to prevent damage. The gauge protects up to 150% of full scale. Check that applied force does not exceed 1000 N.
How to connect the HFG 1K to a PC?
Use the included USB-C cable to connect to a computer. Install the PCE Force Gauge Software from the official website. The gauge appears as a virtual COM port.
How to recharge the battery?
Connect the USB-C charger to the gauge and a power source. The battery indicator shows charging status. Full charge takes about 3 to 4 hours.
What accessories are included with the HFG 1K?
Standard accessories include a hook, flat tip, conical tip, USB cable, charger, and user manual. Additional tips can be purchased separately.
How to set high/low limits?
Press the SET button to enter limit mode. Use arrow keys to define high and low values. When force exceeds or falls below these, the gauge will beep or flash. Press SET to confirm.
Can I use external load cells with the HFG 1K?
Yes, the gauge has an optional external load cell connector. Compatible load cells (sold separately) allow for custom setups. Configure via the menu: select External Load Cell and set the sensitivity.
User questions about HFG 1K PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual HFG 1K - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HFG 1K by PCE Instruments.
USER MANUAL HFG 1K PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : HFG 1K
Category : Measuring equipment