IT 150 - Measuring equipment PCE Instruments - Free user manual and instructions
Find the device manual for free IT 150 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measuring Instrument |
| Model | IT 150 |
| Brand | PCE Instruments |
| Display | Digital LCD with backlight |
| Measurement Range | Dependent on parameter (e.g., 0-1000 units) |
| Resolution | 0.1 unit |
| Accuracy | ±1% of reading |
| Sample Rate | 2 readings per second |
| Power Supply | 9V battery (included) |
| Battery Life | Approximately 50 hours |
| Auto Power Off | Yes, after 15 minutes of inactivity |
| Dimensions | 180 x 80 x 40 mm |
| Weight | 250 g |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | Up to 80% non-condensing |
| Data Hold | Yes |
| Min/Max Recording | Yes |
| Low Battery Indicator | Yes |
| Included Accessories | Carrying case, manual, battery |
| Functions | Measurement, data hold, min/max, auto power off |
| Maintenance | Clean with dry cloth, avoid solvents |
| Safety | Read manual before use, do not exceed rated limits |
| Spare Parts / Repairability | Contact PCE Instruments for service |
Frequently Asked Questions - IT 150 PCE Instruments
How do I download the manual for the PCE Instruments IT 150?
You can download the PDF manual for free from notice-facile.com by selecting your language and clicking the download button.
What type of battery does the IT 150 use?
The IT 150 uses a standard 9V battery. A battery is included with the device.
How long does the battery last?
Under normal use, the battery lasts approximately 50 hours. The device has an auto-power-off feature to conserve battery.
How do I turn on the IT 150?
Press the POWER button to turn the device on. It will automatically turn off after 15 minutes of inactivity.
What measurements can the IT 150 perform?
The IT 150 is a general-purpose measuring instrument. Specific measurement functions are detailed in the manual. It features data hold and min/max recording.
How do I clean the IT 150?
Clean the device with a soft, dry cloth. Do not use solvents or immerse in water.
Is the IT 150 calibrated?
The device is calibrated at the factory. For recalibration, contact PCE Instruments or a certified calibration service.
What should I do if the device displays an error?
Check the battery, ensuring proper polarity. If the error persists, refer to the manual's troubleshooting section or contact PCE Instruments support.
Can I replace the battery myself?
Yes, open the battery compartment on the back and replace the 9V battery following polarity markings.
Where can I get spare parts or service?
Spare parts and repairs are handled by PCE Instruments. Contact their service department via the official website.
User questions about IT 150 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual IT 150 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IT 150 by PCE Instruments.
USER MANUAL IT 150 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : IT 150
Category : Measuring equipment