PVS 20 - Measuring equipment PCE Instruments - Free user manual and instructions
Find the device manual for free PVS 20 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vibration Meter |
| Model | PVS 20 |
| Brand | PCE Instruments |
| Measurement Parameters | Acceleration, Velocity, Displacement |
| Frequency Range | 10 Hz to 1 kHz |
| Measurement Range | Acceleration: 0.1 to 199.9 m/s²; Velocity: 0.1 to 199.9 mm/s; Displacement: 0.001 to 1.999 mm |
| Accuracy | ±5% of reading |
| Display | LCD, 4-digit |
| Power Supply | 9V battery (6F22 or equivalent) |
| Battery Life | Approx. 20 hours continuous use |
| Dimensions | 185 x 68 x 30 mm |
| Weight | Approx. 200 g (including battery) |
| Functions | Data hold, max/min recording, auto power off, low battery indication |
| Accessories Included | Probe, magnetic base, carrying case, manual |
| Standards Compliance | ISO 2954, DIN 45665 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | < 90% RH (non-condensing) |
| Maintenance | Clean with dry cloth; avoid solvents; replace battery when low |
| Safety | Use only as intended; do not drop or expose to extreme conditions |
| Repairability | Battery and probe replaceable; other repairs by qualified personnel |
Frequently Asked Questions - PVS 20 PCE Instruments
How do I turn on the PVS 20?
Press and hold the ON/OFF button for about 2 seconds until the display lights up.
What type of battery does the PVS 20 use?
It uses a standard 9V battery (6F22 or equivalent). You can replace it by opening the battery compartment on the back.
How do I perform a vibration measurement?
Attach the probe to the vibrating surface using the magnetic base or hand-held. Select the parameter (acceleration, velocity, or displacement) using the MODE button. Read the value on the LCD.
What is the correct measurement range for my application?
The PVS 20 automatically selects the range. For very low or high vibrations, ensure the probe is firmly attached and the surface is clean. The device measures up to 199.9 m/s² acceleration.
How do I use the data hold function?
Press the HOLD button once to freeze the current reading on the display. Press again to release.
What does 'max/min' recording do?
Press the MAX/MIN button to enter max/min mode. The display will show the maximum and minimum readings recorded since entering this mode. Press again to exit.
How do I change the measurement unit?
The unit is fixed per parameter: acceleration in m/s², velocity in mm/s, displacement in mm. There is no unit selection.
Why does my PVS 20 turn off automatically?
The device has an auto power-off feature to save battery. It will turn off after about 5 minutes of inactivity. You can disable it by pressing and holding the HOLD button while turning on, but we recommend keeping it enabled to conserve battery.
How do I clean and maintain the PVS 20?
Wipe the exterior with a soft, dry cloth. Do not use any solvents or abrasive cleaners. Store in a dry, cool place when not in use. Replace the battery promptly when the low battery indicator appears.
Where can I find the user manual for the PVS 20?
The manual is available for free on notice-facile.com in PDF format. You can download it directly from the product page.
User questions about PVS 20 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual PVS 20 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PVS 20 by PCE Instruments.
USER MANUAL PVS 20 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : PVS 20
Category : Measuring equipment