WIE-PPS-60 - Uncategorized Wiesenfield - Free user manual and instructions
Find the device manual for free WIE-PPS-60 Wiesenfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Wiesenfield |
| Model | WIE-PPS-60 |
| Product type | Programmable stabilized power supply |
| Input voltage | 230 V AC, 50 Hz |
| Output voltage | 0 – 60 V DC |
| Output current | 0 – 5 A |
| Maximum power | 300 W |
| Dimensions (L × W × H) | 250 × 150 × 100 mm |
| Weight | 2.5 kg |
| Operating temperature | 0 °C to 40 °C |
| Relative humidity | 20 % to 80 % (non-condensing) |
| Protection | Overload, short circuit, overheat |
| Main functions | Voltage and current regulation, digital display, isolated outputs |
| Maintenance and cleaning | Unplug, clean with a dry cloth, avoid abrasive products |
| Safety | Use a grounded outlet, do not expose to water, observe polarity |
| Spare parts | Available through after-sales service (fuses, cords) |
| Repairability | Entrust any repair to a qualified professional |
| Warranty | 2 years (parts and labor) |
| General information | Device intended for indoor use, for laboratory or workshop |
Frequently Asked Questions - WIE-PPS-60 Wiesenfield
How to turn on the device?
Plug the power cord into a compatible mains socket. Press the ON/OFF switch on the front of the device. The screen lights up and displays default values.
What to do if the device does not turn on?
Check that the power cord is correctly plugged in and the mains socket works. Check the fuse near the power input. If the fuse is blown, replace it with a fuse of the same rating. If the problem persists, contact after-sales service.
How to adjust the output voltage?
Use the VOLT and AMP knobs to adjust voltage and current respectively. Turn the knob to increase or decrease the value. The selected value is displayed on the screen. Confirm with the SET button if necessary.
Can I use the device with a battery?
Yes, you can use the device to charge lead-acid or lithium batteries, provided you respect the recommended charging voltage and current. Set the output voltage to the battery's nominal voltage and limit the current to the appropriate value. Never exceed the device's specifications.
How to clean the device?
Unplug the device before cleaning. Use a soft, dry cloth to wipe the casing and screen. Do not use chemicals, abrasives, or liquids. Avoid moisture entering the interior.
Where to find spare parts?
Spare parts (fuses, power cords, connectors) are available through Wiesenfield's after-sales service. Check the website or contact your dealer to order.
Is the device protected against overvoltages?
Yes, the device has built-in protection against overloads, short circuits, and overheating. If limits are exceeded, the device automatically cuts the output to prevent damage. After resolving the issue, reset the device.
Can I use the device outdoors?
No, this device is designed for indoor use only. It must not be exposed to rain, moisture, or extreme temperatures. Use it in a dry, well-ventilated environment.
How to contact customer service?
For any questions or issues, contact Wiesenfield customer service by email at support@wiesenfield.fr or by phone at +33 (0)1 23 45 67 89. Keep your serial number handy.
What is the lifespan of the device?
The estimated lifespan is approximately 5 to 10 years under normal use conditions. Regular maintenance and following safety instructions extend its longevity.
User questions about WIE-PPS-60 Wiesenfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WIE-PPS-60 - Wiesenfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WIE-PPS-60 by Wiesenfield.