WIE-PM-2300B - Uncategorized Wiesenfield - Free user manual and instructions
Find the device manual for free WIE-PM-2300B Wiesenfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunctional electronic device |
| Model | WIE-PM-2300B |
| Brand | Wiesenfield |
| Dimensions (L x W x H) | 300 x 200 x 100 mm |
| Weight | 2.5 kg |
| Power supply | 230 V AC, 50 Hz |
| Power consumption | 150 W |
| Main functions | Projection, distance measurement, digital level |
| Measurement accuracy | ± 1 mm |
| Measuring range | 0.05 – 50 m |
| Display | Backlit LCD screen |
| Measurement units | m / cm / ft / in |
| Internal memory | 20 measurements |
| Laser class | Class 2, < 1 mW, 635 nm |
| Battery life | Approx. 10 hours |
| Battery type | 2 AAA batteries (not included) |
| Maintenance and cleaning | Clean with a dry, soft cloth. Do not use solvents. |
| Safety | Do not look directly into the laser beam. Keep out of reach of children. |
| Spare parts and repairability | Batteries, USB cable, carrying case available as options. |
| General information | Operating temperature: 0°C to 40°C. Max humidity: 85%. |
Frequently Asked Questions - WIE-PM-2300B Wiesenfield
How to turn on the WIE-PM-2300B device?
Press the On/Off button on the side of the device. The LCD screen lights up.
What is the maximum measuring range?
The maximum range is 50 meters under optimal conditions (good brightness, reflective target).
How to change the measurement unit?
Press the UNIT button repeatedly to switch between m, cm, ft, and in.
What to do if the device displays 'Err'?
This may indicate a measurement error. Check that the target is reflective and that the beam is not obstructed. Consult the manual for error codes.
How to clean the lens?
Use a dry microfiber cloth. Avoid any chemicals that could damage the lens.
The device does not turn on, what to do?
Check the batteries (2x AAA). Replace them if necessary. Make sure the polarity is correct.
Is it possible to measure distances continuously?
Yes, hold down the MEASURE button to activate continuous mode. The distance updates in real time.
How to use the leveling function?
Place the device on a flat surface. Activate the digital level via the menu. The screen displays the inclination in degrees.
What are the laser safety precautions?
Never look directly into the laser beam. Class 2: avoid prolonged exposure. Keep the device out of reach of children.
How to reset the device?
Hold down the ON/OFF button for 10 seconds until the screen turns off and on again.
User questions about WIE-PM-2300B Wiesenfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WIE-PM-2300B - Wiesenfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WIE-PM-2300B by Wiesenfield.
USER MANUAL WIE-PM-2300B Wiesenfield
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wiesenfield
Model : WIE-PM-2300B
Category : Uncategorized