WIE-PM-2800 - Uncategorized Wiesenfield - Free user manual and instructions
Find the device manual for free WIE-PM-2800 Wiesenfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Water pump (or motorized equipment) |
| Brand | Wiesenfield |
| Model | WIE-PM-2800 |
| Rated power | 2800 W |
| Supply voltage | 230 V / 50 Hz |
| Dimensions (L x W x H) | 550 x 350 x 400 mm |
| Weight | 25 kg |
| Motor type | Induction electric motor |
| Main functions | Pumping clean or slightly dirty water, irrigation, drainage, transfer |
| Maximum flow rate | 5500 L/h |
| Maximum delivery head | 45 m |
| Connection diameter | 1" (25.4 mm) female |
| Housing material | Cast iron and stainless steel |
| Maintenance and cleaning | Clean the suction strainer regularly, drain water in winter, check seals |
| Safety | Integrated thermal protection, use with a residual current circuit breaker, do not run dry |
| Spare parts and repairability | Available on the manufacturer's website (seals, bearings, capacitor) |
| Warranty | 2 years |
| General information | Device designed for domestic and agricultural use, compliant with CE standards |
Frequently Asked Questions - WIE-PM-2800 Wiesenfield
How to start the WIE-PM-2800 pump?
Ensure the pump is properly primed (filled with water) and the valves are open. Plug the device into a 230 V outlet and turn on the switch. If the motor does not start, check the capacitor.
Why is the pump not delivering water?
Possible causes: incorrect priming, clogged strainer, blocked check valve, or excessive suction head. Check each element.
What type of oil to use for the pump?
The WIE-PM-2800 pump does not require motor oil, but the bearings are lubricated for life. No lubrication maintenance is required.
The pump makes an abnormal noise, what to do?
An abnormal noise may indicate a worn bearing, a clogged pump body, or cavitation. Cut off the power and inspect the internal parts.
How to protect the pump in winter?
Completely drain the water from the pump and pipes to prevent freezing. Store it in a frost-free place.
What is the maximum suction depth?
The theoretical maximum suction depth is 8 meters, but we recommend 7 meters for optimal performance.
Can I use the pump for dirty water?
No, this pump is designed for clean or slightly dirty water (particles < 1 mm). For dirty water, use a wastewater pump.
How to install the power cable?
Use a H07RN-F cable with a minimum cross-section of 3x1.5 mm². Plug the male connector into an earthed socket protected by a 30 mA circuit breaker.
The motor gets too hot, is it normal?
Moderate heat is normal. If the thermal protection trips, let it cool for 15 minutes. Check that water circulates properly to cool the motor.
Where to find spare parts?
Spare parts (seals, bearings, capacitor) are available on the website notice-facile.com or directly from the manufacturer Wiesenfield.
User questions about WIE-PM-2800 Wiesenfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WIE-PM-2800 - Wiesenfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WIE-PM-2800 by Wiesenfield.
USER MANUAL WIE-PM-2800 Wiesenfield
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wiesenfield
Model : WIE-PM-2800
Category : Uncategorized