PowerConnect B-MLXE16 - Router DELL - Free user manual and instructions
Find the device manual for free PowerConnect B-MLXE16 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Chassis Router/Switch |
| Model | PowerConnect B-MLXE16 |
| Dimensions (H x W x D) | 17.5 x 17.5 x 17.5 inches (44.5 x 44.5 x 44.5 cm) |
| Weight | Approximately 100 lbs (45 kg) fully loaded |
| Power Supply | Dual redundant AC/DC power supplies, 2000W each |
| Number of Slots | 16 (including 2 for management modules) |
| Maximum Port Density | Up to 384 10G ports or 96 40G ports |
| Switching Capacity | Up to 6.4 Tbps |
| Supported Protocols | Ethernet, IP routing, MPLS, VPLS, BGP, OSPF, etc. |
| Cooling | Variable speed fans, front-to-back airflow |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 5% to 90% non-condensing |
| Safety Certifications | UL, CSA, CE, FCC Class A |
| Management | CLI, SNMP, Web GUI, SSH, Telnet |
| Warranty | Standard 1-year limited hardware warranty |
Frequently Asked Questions - PowerConnect B-MLXE16 DELL
How do I reset the PowerConnect B-MLXE16 to factory defaults?
To reset the router, press and hold the reset button on the front panel for 10 seconds using a paperclip. Alternatively, you can use the CLI command erase startup-config followed by reload.
What type of power cord does the MLXE16 require?
The MLXE16 uses a standard C19 power inlet. Each power supply requires a separate power cord rated for the voltage in your region (e.g., NEMA 5-20 in North America).
Can I mix different line card types in the chassis?
Yes, the chassis supports a mix of line cards as long as they are compatible with the same backplane. Refer to the compatibility matrix in the manual for supported combinations.
How do I upgrade the firmware on the PowerConnect B-MLXE16?
Firmware can be upgraded via the CLI using the copy tftp flash command or through the web GUI by uploading the image file. Always backup the current configuration before upgrading.
What is the maximum number of VLANs supported?
The device supports up to 4096 VLANs (802.1Q), with a maximum of 4095 active VLANs per switch.
How do I configure a static IP on the management port?
Access the CLI, enter enable mode, then use interface mgmt 1, ip address command followed by the desired IP and subnet mask. For example: ip address 192.168.1.10 255.255.255.0.
Are there any known cooling issues with a fully loaded chassis?
The MLXE16 is designed with redundant fans and temperature sensors. Ensure all empty slots have filler panels to maintain proper airflow. If overheating occurs, check the fan status via show environment.
Can I use SFP+ modules from other vendors?
While the device may accept third-party optics, Dell recommends using Dell qualified modules for best performance and reliability. Unsupported modules may cause link issues or void warranty.
How do I back up the configuration file?
Use the CLI command copy running-config tftp or copy startup-config tftp to save the configuration to a TFTP server. You can also use the web GUI to download the config file.
What indicator lights are on the front panel?
The front panel includes power LED (green), system status LED (green/amber), fan status LED (green/red), and port link/activity LEDs per module. Refer to the manual for detailed descriptions.
User questions about PowerConnect B-MLXE16 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual PowerConnect B-MLXE16 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerConnect B-MLXE16 by DELL.