FunCub Next Generation - Remote control toy MULTIPLEX - Free user manual and instructions
Find the device manual for free FunCub Next Generation MULTIPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Radio-controlled aircraft (electric glider) |
| Brand | MULTIPLEX |
| Model | FunCub Next Generation |
| Category | Radio-controlled toy |
| Wingspan | 1300 mm |
| Length | 980 mm |
| Empty weight | Approximately 680 g |
| Maximum takeoff weight | 1000 g |
| Engine | Brushless outrunner motor (Multicam-S type) |
| Propeller | 9x4.7 inches |
| Recommended battery | LiPo 3S 11.1 V 1300-1800 mAh |
| Radio | Min. 4 channels (aileron, elevator, rudder, throttle) |
| Servos | 4 micro servos (standard type) |
| Construction material | Elapor foam (durable and lightweight) |
| Main features | Acrobatic flight, short takeoff/landing, slow flight, optional gyroscopic stabilization |
| Maintenance and cleaning | Clean with a damp cloth; avoid solvents. Check screws and connections after each flight. |
| Safety | Disconnect battery after use; do not fly near people or animals. |
| Spare parts and repairability | Available parts: wings, fuselage, cowling, propeller, landing gear. Repair possible with cyanoacrylate glue. |
| General information | Designed for intermediate and advanced pilots. Requires radio and battery (not included). |
Frequently Asked Questions - FunCub Next Generation MULTIPLEX
What type of battery is recommended for the FunCub Next Generation?
It is recommended to use a LiPo 3S (11.1 V) battery with a capacity between 1300 and 1800 mAh. Make sure the connector is compatible (XT60 preferred).
Is the model suitable for beginners?
The FunCub Next Generation is intended for intermediate pilots with some RC flying experience. Its stability and robustness nonetheless make it a good choice for progressing.
What radio is needed to fly this model?
A minimum 4-channel radio is required (aileron, elevator, rudder, throttle). Radios with built-in gyroscopic stabilization (such as Spektrum or FrSky) are compatible.
How to maintain the plane after a flight?
After each flight, clean the foam with a soft damp cloth. Check that all screws and connections are tight. Store the model away from heat and humidity.
What is the exact wingspan of the FunCub Next Generation?
The wingspan is 1300 mm (51 inches). This gives it good flight stability while remaining portable.
Can damaged parts be replaced?
Yes, many spare parts are available: wings, fuselage, motor cowling, propeller, landing gear, etc. Repairs can be done with cyanoacrylate glue suitable for Elapor foam.
Is the model delivered ready-to-fly?
No, the FunCub Next Generation is sold as a kit (requires assembly). Radio, servos, motor and propeller are not included (except RR version). Check the version you are buying.
What type of flying can be done with this plane?
The FunCub Next Generation allows acrobatic flight (loops, rolls), slow flight (thanks to its lifting profile) and very short takeoffs/landings, even on grass.
Is there a version with gyroscopic stabilization?
Some versions (like the FunCub NG RR) include a stabilized receiver (built-in gyroscope) that facilitates flying in wind. It is possible to add one to the kit version.
How to transport the FunCub Next Generation?
Thanks to its robust Elapor foam construction, the plane can be transported disassembled (removable wings) in a suitable carrying bag. It is advisable to store it in a dry place protected from impacts.
User questions about FunCub Next Generation MULTIPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control toy in PDF format for free! Find your manual FunCub Next Generation - MULTIPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FunCub Next Generation by MULTIPLEX.
USER MANUAL FunCub Next Generation MULTIPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MULTIPLEX
Model : FunCub Next Generation
Category : Remote control toy