RC15 - Beard trimmer GIRMI - Free user manual and instructions
Find the device manual for free RC15 GIRMI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Beard trimmer |
| Brand | Girmi |
| Model | RC15 |
| Dimensions (L x W x H) | 16 x 4 x 4 cm |
| Weight | 180 g |
| Power supply | Rechargeable lithium-ion battery |
| Battery life | 60 minutes |
| Charging time | 8 hours |
| Input voltage | 100-240 V (AC adapter) |
| Blade type | Stainless steel |
| Cutting guides | 2 adjustable combs (1-10 mm) |
| Main functions | Precise cutting, dry or in-shower use (washable blades) |
| Maintenance | Clean blades with included brush, oil regularly |
| Safety | Blade protection guard |
| Included accessories | Cleaning brush, oil, 2 combs, charger |
| Spare parts available | Replacement blades, combs, adapter |
| Warranty | 2 years |
Frequently Asked Questions - RC15 GIRMI
How to clean the Girmi RC15 beard trimmer?
Remove the blades by unclipping them, then brush away hair residue with the included brush. You can rinse the blades under warm water. Let dry completely before reassembling and oil the blades.
How to adjust the cutting length?
Use the included cutting combs: slide the one with the desired length (1 to 10 mm) onto the trimmer. Start with a longer length and gradually reduce.
Can the trimmer be used in the shower?
Yes, the blades are washable and the device supports wet use, but do not fully immerse. Suitable for shower use.
How long does it take to charge the battery?
Full charging time is about 8 hours. Use only the provided charger.
How to replace the blades?
Unclip the worn blade assembly, then snap on a new compatible blade set. Replacement blades are available under reference Girmi RC15-Lame.
Does the trimmer make noise when turned on?
The noise level is moderate and typical for this type of device. Excessive noise may indicate a need for cleaning or lubrication.
How to oil the blades?
Apply a drop of the provided oil on the blade teeth after each use. Turn on for a few seconds to distribute the oil.
What to do if the trimmer stops working?
Check the battery charge. If it doesn't turn on, clean the charging contacts. If the problem persists, contact Girmi customer service.
Can the trimmer be used without the combs?
Yes, without a comb you will get a very close cut (about 0.5 mm). Ideal for edges or a close shave.
Where to find spare parts?
Replacement blades and combs are available on the Girmi website or from authorized dealers. Always use original parts.
User questions about RC15 GIRMI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beard trimmer in PDF format for free! Find your manual RC15 - GIRMI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RC15 by GIRMI.
USER MANUAL RC15 GIRMI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIRMI
Model : RC15
Category : Beard trimmer