VALERA

Swiss Excellence Smart - Beard trimmer VALERA - Free user manual and instructions

Find the device manual for free Swiss Excellence Smart VALERA in PDF.

📄 98 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice VALERA Swiss Excellence Smart - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Beard Trimmer
Brand Valera
Model Swiss Excellence Smart
Power Supply Rechargeable Li-ion battery, 100-240 V, 50-60 Hz
Battery Life Up to 90 minutes
Charging Time Approximately 60 minutes
Quick Charge 5 minutes for emergency use
Blade Type Self-sharpening stainless steel blades
Cutting Width Approximately 40 mm
Height Settings 20 notches from 0.2 mm to 8 mm
Cutting Combs 5 combs from 3 to 12 mm
Corded/Cordless Use Cordless (battery) and corded with adapter
Water Resistance Washable under water, IPX7
Display LED display with charge indicator
Weight Approximately 180 g
Dimensions 18 x 4 x 4 cm
Maintenance Removable blades, cleaning under running water
Included Accessories Power adapter, cleaning brush, cutting combs, storage case
Warranty 2 years
Country of Origin Switzerland

Frequently Asked Questions - Swiss Excellence Smart VALERA

How to clean the Valera Swiss Excellence Smart beard trimmer?
Remove the cutting head and rinse it under running water. Use the provided brush to remove residues. Dry thoroughly before reassembling. Do not immerse the device in water.
Can the trimmer be used plugged in when the battery is empty?
Yes, you can use the device plugged into the mains even if the battery is empty. Simply plug in the adapter and use it in corded mode.
How long does the battery of the Swiss Excellence Smart last?
The battery life is approximately 90 minutes of cordless use. Full charge takes about 60 minutes. A 5-minute quick charge provides enough power for emergency use.
Can I use the trimmer in the shower?
The device is splash-resistant and can be cleaned under water, but it is not designed for use in the shower. Use it on dry skin preferably.
How to replace the blades?
The blades are integrated into the cutting head. To replace them, remove the head, unclip the used blades and insert new ones. Make sure the replacement blades are compatible with the Swiss Excellence Smart model.
What to do if the trimmer no longer cuts well?
Check that the blades are clean and free of embedded hairs. If necessary, lightly oil the blades. If the problem persists, the blades may be dull and require replacement.
Is there a battery level indicator?
Yes, the LED display shows the battery charge level. A red light turns on when the battery is low.
Is the trimmer under warranty?
Yes, the Valera Swiss Excellence Smart is guaranteed for 2 years against manufacturing defects. Keep your receipt for any claims.
Can I adjust the cutting height without a comb?
Yes, you can use the adjustment wheel on the side of the device to set the cutting height from 0.2 mm to 8 mm in 0.2 mm increments.
How to store the trimmer?
Use the provided storage case to protect the device. Make sure it is clean and dry before storing. Avoid humid environments.

User questions about Swiss Excellence Smart VALERA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Beard trimmer in PDF format for free! Find your manual Swiss Excellence Smart - VALERA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Swiss Excellence Smart by VALERA.

USER MANUAL Swiss Excellence Smart VALERA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : VALERA

Model : Swiss Excellence Smart

Category : Beard trimmer