MSK 140/OHD - Antenna KATHREIN - Free user manual and instructions
Find the device manual for free MSK 140/OHD KATHREIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Satellite Antenna (Outdoor) |
| Brand | Kathrein |
| Model | MSK 140/OHD |
| Dish Diameter | 140 cm (55.1 inches) |
| Material | Steel / Aluminum |
| Color | White or Grey |
| Weight | Approximately 12 kg (26.5 lbs) |
| Mounting Type | Wall or Pole Mount |
| Polarization | Linear (Vertical/Horizontal) |
| LNB Included | Yes, Single or Twin LNB |
| Frequency Range | 10.7 – 12.75 GHz (Ku-band) |
| Gain | Approximately 40 dBi |
| Wind Load | Up to 120 km/h (75 mph) |
| Operating Temperature | -30°C to +60°C (-22°F to 140°F) |
| Water Resistance | IP54 rated |
| Primary Function | Receiving satellite television signals |
| Multi-Satellite Support | Yes, with optional multi-feed bracket |
| Motorized Option | Compatible with DiSEqC motors |
| Installation Recommendation | Professional installation recommended |
| Maintenance | Clean with soft, damp cloth; avoid abrasive cleaners |
| Safety | Ensure proper grounding to avoid lightning damage |
| Spare Parts Available | LNB, mounting brackets, feedhorn, cable |
| Repairability | Modular design allows easy replacement of components |
Frequently Asked Questions - MSK 140/OHD KATHREIN
What tools are needed to assemble the Kathrein MSK 140/OHD antenna?
You will typically need a wrench set, screwdrivers (Phillips and flathead), a compass or satellite finder, and a coaxial cable stripper for the LNB connection.
How do I align the dish to receive satellite signals?
Use a satellite finder meter or the signal strength menu on your receiver. Set the dish to the correct azimuth (based on your location and satellite) and adjust elevation and skew while monitoring signal quality.
Is the MSK 140/OHD suitable for weak signal areas?
Yes, its 140 cm diameter provides high gain (approx. 40 dBi), making it effective in areas with weaker satellite signals or for receiving multiple satellites.
Can I use this antenna with a motorized mount?
Yes, the antenna is DiSEqC 1.2 compatible and can be paired with a suitable motor to automatically switch between satellites.
What type of LNB comes with the antenna?
The antenna typically includes a single or twin LNB for Ku-band (10.7–12.75 GHz). For multiple receivers, consider upgrading to a quad LNB.
How weather-resistant is the MSK 140/OHD?
The dish is built to withstand wind loads up to 120 km/h and has an IP54 rating, protecting against dust and splashing water. Ensure all connections are waterproofed.
What maintenance is required for the antenna?
Periodically clean the dish with a soft, damp cloth to remove dirt and snow. Check cable connections for corrosion and tighten mounting bolts after storms.
Can I mount the antenna on a wall or a pole?
Yes, the package includes a universal mount that can be attached to a wall or a pole (diameter 40–60 mm). Ensure the mount is securely anchored.
Are spare parts available for this model?
Yes, common spare parts such as LNBs, mounting brackets, feedhorns, and cables are available through Kathrein service centers or authorized dealers.
How do I connect the antenna to my satellite receiver?
Run a coaxial cable from the LNB to the receiver’s LNB IN port. For multiple receivers, use a DiSEqC switch or a multi-output LNB. Ensure the cable is properly grounded.
User questions about MSK 140/OHD KATHREIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Antenna in PDF format for free! Find your manual MSK 140/OHD - KATHREIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MSK 140/OHD by KATHREIN.
USER MANUAL MSK 140/OHD KATHREIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KATHREIN
Model : MSK 140/OHD
Category : Antenna