Care Q10 BT - Thermometer TrueLife - Free user manual and instructions
Find the device manual for free Care Q10 BT TrueLife in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Non-contact Infrared Thermometer |
| Brand | TrueLife |
| Model | Care Q10 BT |
| Dimensions | Approx. 150 x 40 x 40 mm |
| Weight | Approx. 100 g (including batteries) |
| Power Supply | 2 x AAA alkaline batteries (1.5 V) |
| Measurement Range | 32.0 °C to 42.9 °C (body temperature mode) |
| Accuracy | ±0.2 °C (for body temperature mode) |
| Measurement Distance | 1-5 cm from the forehead |
| Response Time | 1 second |
| Bluetooth | Bluetooth 4.0 or higher for data synchronization |
| Memory | Stores up to 50 readings |
| Display | LCD display with backlight |
| Measurement Modes | Body temperature, object temperature, room temperature |
| Auto Shut-off | After 30 seconds of inactivity |
| Cleanliness | Clean the lens with a soft dry cloth or alcohol wipe |
| Safety Certifications | CE, FDA (if applicable) |
| Spare Parts | Batteries (user-replaceable); no other consumables |
| Reparability | Non-repairable by user; contact manufacturer for support |
| General Information | Designed for clinical and home use; suitable for all ages |
Frequently Asked Questions - Care Q10 BT TrueLife
How do I turn on the TrueLife Care Q10 BT thermometer?
Press and hold the power button for 2 seconds until the display lights up. The device is ready for measurement.
How do I measure temperature correctly?
Point the thermometer at the center of the forehead, 1-5 cm away. Press the measurement button and wait for the beep. Keep the device steady during measurement.
What does the Bluetooth function do?
The Bluetooth feature allows you to sync temperature data with the TrueLife app on your smartphone. Ensure Bluetooth is enabled on your phone and follow the app instructions.
How do I switch between Celsius and Fahrenheit?
While the device is off, press and hold the power button for 5 seconds. The display will flash between °C and °F. Release when the desired unit appears.
Can I use this thermometer on objects or liquids?
Yes, the Care Q10 BT has an object mode. Press the mode button to switch to surface temperature measurement. Do not use for medical diagnosis in object mode.
How do I clean the thermometer?
Turn off the device and wipe the lens with a soft cloth slightly dampened with 70% isopropyl alcohol. Never immerse the thermometer in water.
What batteries does it need and how long do they last?
It requires 2 AAA alkaline batteries (1.5 V). Under normal use, batteries last approximately 1 year or 8,000 measurements.
What does the error message 'Err' mean?
'Err' indicates a measurement error. Possible causes: too far or too close, dirty lens, or low battery. Re-measure after correcting.
Is the thermometer safe for babies?
Yes, it is safe for all ages. There is no radiation. Keep the device away from direct sunlight and store in a cool dry place.
How do I reset the thermometer to factory settings?
Remove the batteries, wait 30 seconds, then reinsert them. This clears all memory and resets settings. To pair Bluetooth again, follow the app instructions.
User questions about Care Q10 BT TrueLife
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermometer in PDF format for free! Find your manual Care Q10 BT - TrueLife and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Care Q10 BT by TrueLife.
USER MANUAL Care Q10 BT TrueLife
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TrueLife
Model : Care Q10 BT
Category : Thermometer